Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Packard Bell PBT-520
Summary of Contents for Packard Bell PBT-520
- Page 1 Non-Contact Infrared Thermometer PBT-520 User Guide...
- Page 2 The Packard Bell Non-Contact thermometer is a safe and quick way to check temperatures and avoid contact and contamination. It measures the infrared energy radiated from the skin (forehead area) through the thermometer’s infrared sensor and converts that to the equivalent oral temperature value.
- Page 3 used, place it in the patient’ s room for 10 minutes before taking a measurement. • Remove batteries when storing for long periods. • Do not use the thermometer for purposes other than its original design. • Avoid dropping the thermometer and protect it from severe impact and shock.
- Page 4 Buttons and Details Surface °C Body °F 888 8 1. LCD display 2. SET/Settings 3. Mode / + (view history data) 4. Mode / – (view history data) 5. Infrared sensor 6. Trigger 7. Battery cover...
-
Page 5: Display Details
Display Details Surface °C Body °F 888 8 1. Surface temperature mode 2. Body temperature mode (default) 3. Temperature reading 4. Last temperature readings 5. Celsius indicator / Fahrenheit indicator (default) 6. Battery level 7. Sound ON/OFF... -
Page 6: Installing Batteries
Installing Batteries 1. On the bottom of the thermometer, slide the battery cover to open. 2. Insert 2 new alkaline AAA batteries (not included) being sure to align them properly as shown. 3. Close the cover, making sure it’s locked shut. Note: •... - Page 7 Taking a temperature reading (Body Mode) 1. Press the TRIGGER to turn the thermometer ON. The LCD display will light up Green and display all icons for about 1 second. NOTE: The thermometer will shut off automatically after 15 seconds of inactivity. Surface °C Body...
- Page 8 3. Press the TRIGGER to take a measurement. After 1 second, a beep will be heard and the thermometer will display a temperature reading. Body °F 98 6 4. Upon measuring the body temperature, the backlight color of the LCD display will be based on the test result. Refer to the Fever Alert System section for more information.
- Page 9 Temperature Readings History The thermometer automatically saves up to 30 past temperature readings. To view, press [+] and [–] while on the default display to flip through the saved temperature readings. Mode + Mode – Past temperature readings Body Body °F °F 98 8...
- Page 10 Fever Alert System The Fever Alert System helps you quickly understand body temperatures using different backlight colors. The LCD displays a green, orange or red backlight (happy or sad face) based on the temperature reading. normal low fever high fever Temperature Display Color Smiley Face...
-
Page 11: Changing Modes
Changing Modes Temperature Mode (Body/Surface) The thermometer has two temperature Surface reading modes: Body °F 888 8 Body: Provides accurate body temperature readings. Surface: Provides accurate temperature readings of bath water, surfaces, bottles, or food. Press the SET button once to toggle between Body and Surface. Temperature Unit (Fahrenheit/Celsius ) Press and hold the SET button for 3 seconds to enter the setting mode. - Page 12 Calibration Press and hold the SET button for 3 seconds to enter the settings mode, F1 will be displayed. Now press the SET button again and F2 will be displayed. This feature is to adjust for temperature compensation. You can adjust the calibration according to your actual average temperature.
-
Page 13: Troubleshooting
Troubleshooting Error message Description Body °F If the body temperature is lower than 89.6°F /32.0°C (for surface if it’s lower than 32°F/ 0°C), "Lo" is displayed with a red backlight and 3 beeps. Body °F If the body temperature is higher than 107.6°F /42.0°C (for surface if it’s higher than 176°F /80°C), "Hi"... -
Page 14: Speci Cations
Legal Information Designed and distributed by Southern Telecom Inc. © 2020 All Rights Reserved. Packard Bell® is a registered trademark of PBX Holding LLC. Images simulated and may differ from the actual product. Made in China. For questions or help with your product, please visit:... - Page 15 Reference number: YHKY-2000 Manufacturing License(s):Hunan CFDA Production Permit No. 20200009 Registration certificate(s):HNMPA Certified 20202070418 Technical Requirements/Specifications：HNMPA Certified 20202070418 Date of production: 20200428 Registrant / production enterprise: Hunan Yinghe Kangyuan Biological Engineering Co., Ltd. Address / production address: Building 16, Phase 3, Standard Factory Building, Junshan Industrial Park, Junshan District, Yueyang City, Hunan Province Phone: +86-0730-3165771...