Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Zamp Solar DOMETIC SCC1012
Summary of Contents for Zamp Solar DOMETIC SCC1012
- Page 1 SCC1012 MPPT SOLAR CHARGE CONTROLLER USER MANUAL INPUT: DC 100V MAXIMUM OUTPUT: DC 12V / 24V 30A THIS MANUAL CONTAINS IMPORTANT SAFETY AND OPERATING INSTRUCTIONS. PLEASE READ AND FOLLOW INSTRUCTIONS TO ENSURE PROPER OPERATION. TECH SUPPORT 541-728-0924 support@zampsolar.com...
- Page 2 This charger is designed for indoor use only and should never be exposed to rain. • Do not disassemble the controller. Contact Zamp Solar support if the unit requires attention. • Lead acid, LCO, LiFePO4, LTO, LI-95 batteries can be dangerous. Ensure no sparks or flames are present when working near batteries.
-
Page 3: Mounting The Controller
MOUNTING THE CONTROLLER The Solar Controller should be mounted using the mount points highlighted in red shown in the image below Mount the unit to a flat surface TECH SUPPORT 541-728-0924 support@zampsolar.com... -
Page 4: Wiring Connections
WIRING CONNECTIONS To protect the Battery and the Solar Panel, it is strongly recommend that you place an inline fuse on the positive wire on both the “Solar” and “Battery” Circuits. 40A fuse for 30A controller, (As close to the Battery /Panel as possible) Refer to the below drawing, please cover the solar panel before connecting cables. - Page 5 CONTROLER OPERATION – LCD DISPLAY When the controller powers on, the unit will run self-qualify mode and automatically show below items on LCD before going into charging process Self-test starts, digital meter segments test Software version test System battery voltage and current test External battery temperature sensor test (if connected) Absorption voltage test Float voltage test...
- Page 6 CHARGING STAGE This solar controller provides multiple charging stages with smart charging algorithm. For Lead acid battery (Crystal, Gel, AGM, WET and Calcium battery): Soft Charge – Bulk Charge - Absorption charge - Equalizing Charge* - Float charge For Lithium battery (LCO, LI-95, LFP, LTO battery) Soft Charge –...
-
Page 7: Led Indicators
LED INDICATORS NORMAL CHARGE LED INDICATRIONS LED COLOR GREEN BLUE WHITE WHITE WHITE WHITE SOFT-START FLASH FLASH BULK CHARGE FLASH ABSORBTION/ FLASH EQUALIZATION FLOAT CHARGE ABNORMAL CHARGE SOLAR PANEL ABNORMAL MODE LCD DISPLAY LED INDICATION LCD BACKLIGHT SOLAR PANEL WEAK <15V FLASH SOLAR PANEL REVERSE FLASH... -
Page 8: Safety Protections
SAFETY PROTECTIONS – Reverse polarity solar and battery connection. – Against reverse current from battery to solar panel at night. – Transient over voltage protection, a varistor or transient voltage suppressor (TVS) at the solar input and battery output against surge voltage. MAINTENANCE Occasionally check that the wire terminals are securely tightened.