Table of Contents
Advertisement
PARTS
Before installing, verify all parts are included. If any parts are
damaged and/or missing, contact your dealer or a Sharp Authorized
Servicer.
PART INCLUDED
PARTS
Anti-Tip Bracket
Oven Probe
Flat Rack
Gliding Rack (some models)
Optional Rear Trim Kit
MATERIALS NEEDED
The utility connection and house structure at each home may be
different, so the specific parts required for connection to the house
are not included with the product. The parts identified below are
or may be required to complete the installation. Always use new
components and never use an old part for new range installation.
14-50P
GETWIREDUSA FX359
POWER CORD
5
/
" OD SLEEVE ANCHOR (WITH
16
(FOR CONCRETE FLOORS ONLY)
SUPPLIED BY INSTALLER
(NOT INCLUDED)
The utility connection and house structure of each home varies,
so specific parts required for connection are not included with
the product and must be purchased separately. Always use new
components; never use an old part for a new range installation.
QUANTITY
1 bracket, 2 screws
1
1 or 2 (depending on the model)
1
1 trim, 2 screws
STRAIN RELIEF FOR
POWER CORD
(SUPPLIED WITH CORD KIT)
1
/
" BOLT) - 2 PCS
4
TOOLS NEEDED
CUT RESISTANT GLOVES, SAFETY GLASSES OR GOGGLES, STEEL-TOED SHOES
(FOR YOUR SAFETY AND PROTECTION)
DROP CLOTH OR CARDBOARD
(OPTIONAL - TO PROTECT FLOOR)
TAPE MEASURE
(TO CONFIRM INSTALLATION SPACE)
ADJUSTABLE GROOVE-JOINT OR
GOOSENECK PLIERS
(FOR LEVELING PRODUCT)
NUT DRIVER
(FOR ELECTRICAL CONNECTIONS AND
ANTI-TIP BRACKET INSTALLATION)
120VAC OUTLET TESTER (TO CHECK
ELECTRIC SUPPLY GROUNDING)
2
1
DRILL AND
/
" DRILL BIT (FOR ANTI-
8
TIP BRACKET INSTALLATION)
PHILLIPS SCREWDRIVER (TO ACCESS
SERVICEABLE COVERS)
LEVEL
(FOR LEVELING PRODUCT)
PENCIL AND RULER
(FOR ANTI-TIP BRACKET
INSTALLATION)
MASONRY DRILL BIT
(FOR ANTI-TIP BRACKET
INSTALLATION - CONCRETE
FLOORS ONLY)
Advertisement
Table of Contents
