Table of Contents
Advertisement
When you set a programme, the appliance automatically selects the
maximum spin speed.
Touch this button repeatedly to:
•
•
•
Centrif.
10
touch but‐
ton
By means of Centrif. touch button, you can also set:
•
•
Decrease the spin speed.
The display shows only the spin speeds available for the set pro‐
gramme.
Activate the Rinse Hold option .
The water of the last rinse is not drained out to prevent the fabrics
from creasing. The washing programme ends with water in the
drum and the final spin phase is not performed. The display shows
the indicator
. The door stays locked. The drum turns regularly
to reduce creasing. You must drain the water to unlock the door.
Touch Inicio/Pausa button: the appliance performs the spinning
phase and drains the water.
Activate the Extra Silent option.
All spinning phases (intermediate spin and final spin) are sup‐
pressed and the programme ends with water in the drum. This
helps to reduce creasing. As the programme is very quiet, it is suit‐
able for use at night time when cheaper electricity tariffs are avail‐
able. In some programmes the rinses are performed with more
water. The display shows the indicator
The drum turns regularly to reduce creasing. You must drain the
water to unlock the door.
Touch the Inicio/Pausa button button: the appliance performs only
the draining phase.
The appliance empties the water out automatically
after approximately 18 hours.
Only drain
Activate the drain-only option (Skipping the wash, rinse and
spin phases):
The appliance performs the only draining phase of the selected
washing programme. The display shows the indicator
the indicator
(no spin) and the indicator
Only spin
Activate the spin-only option (Skipping the wash and rinse
1)
phases)
:
The appliance performs only the spinning phase of the selected
washing programme. The display shows the indicator
the phase indicator
. The door stays locked.
and the spin speed.
ENGLISH
17
(cold),
.
(cold),
Advertisement
Table of Contents
