Watkins Wellness FreshWater Salt System Owner's Manual page 9

4. System Test
The system status test shows you if the system is performing optimally. It reflects a number
of elements that can impact performance, including the salt level, cartridge status (clean/
dirty), and water temperature. The status automatically updates. You can manually update
the system status by activating the status test using your control panel. Table 4 lists system
status messages with meaning or action required.
Green - System is optimal.
Yellow OK - System is OK but should be monitored (see Troubleshooting on page 8).
Red LOW - The system needs your attention and is NOT generating chlorine. The
cartridge may be expired, or the salt level may be low (see Troubleshooting on page 8).
Red HIGH - The system needs your attention and is NOT generating chlorine. The salt
level is high (see Troubleshooting on page 9).
Status Message on Screen
(Actual Message may vary Depending on Spa)
Okay
Inactive-System Off
System Testing
24-Hour Boost Cycle On
1. Dip Test Strip
2. Balance Water
3. Soften Water
4. Adjust Level & Confirm
Inactive-Summer Timer On
Inactive-High Status
1. Dip Salt Strip
2. Check/Replace Cartridge
Inactive-Low Status
1. Dip Salt Strip/Clean Filter
2. Check/Replace Cartridge
Cartridge Reached 4 Months
Replace Cartridge?
Remove Cartridge Now
Insert New Cartridge
Press System Restart
Salt System Restarting...
Service Required Contact Dealer
Error #
FreshWater Salt System
Meaning or Action Required
Operating normally
System Off
Output level is set to 0
System test initiated/in progress
Increasing chlorine level
Output level is set to 10 for 24 hours
5-Way Test Strip
10-day verification
Test water, adjust output level, confirm
Salt test strip
System is disabled for eight hours when
Summer Timer is active
Non-operational high salt level detected -
correct salt level; check/replace cartridge
Test water with salt test strips and add salt if
needed. Check/clean filter. Replace cartridge.
Replace cartridge now or postpone 7 days
Step 1 of cartridge change process
Step 2 of cartridge change process
Step 3 of cartridge change process
Step 4 of cartridge change process
Contact dealer for service
Table 4
Page 7