Advertisement
ASSEMBLY INSTRUCTIONS
FOR VERTICAL
STEP 2
:
.
a Lift and position where the Mirror will reside on the wall
surface and with a tape measure, mark distance from floor
to the bottom edge of the frame with a pencil. Mark should
be located at a point representing ½ of mirror width.
b. Place the Mirror on a flat surface with back facing you.
Measure the distance from the bottom edge of the Mirror
Frame to Hanger on the bottom of the Mirror Frame. This
represents distance "B" in the illustration.
c. With tape measure, add this distance to Mark "A" on wall
surface and mark with pencil.
d. Measure distance between the Hangers on the top and
bottom of the Mirror Frame. With tape measure, add this
distance from Mark "B" and mark with pencil.
Mark "B" and Mark "C" are vertical.
e. Measure 3" up from Mark "C" and mark. These marks are
locators for the Mirror Hanger.
STEP 3
:
.
a Screw the Self-tapping Screw into the Mark "B" as shown.
Please be sure there are proper length left for supporting
the Hanger on the bottom of the Frame.
. Locate the Mirror Hanger and align the top center with 3"
b
Locator mark. Secure them to wall surface with Hanger
Nails. Please be noted that the Mirror Hangers are fully
adjustable.
STEP 4
:
.
a With the help of another person, pass the Holder on the bottom of the Frame over the Self-tapping Screw
and pass the Holder on the top of the Frame over the Mirror Hanger so that the Hanger rests on the inside
of the Bracket Catches.
.
c If needed, using Adjustment Screws on Mirror Hanger to achieve the proper hanging height.
STEP 5
:
.
a Clean glass with household glass cleaner. Retain this sheet for future reference.
Make sure
Hanger Nail
2 OF 3
STYLE NUMBER: QR787
Hanger
BACK
Hanger
" A"
½ WIDTH
Hanger (on the top
of the Frame)
Mirror Hanger
Adjustment
Screw
Mark "C"
Bracket Catch
Hanger (on the bottom
of the Frame)
Mark "B"
Floor
Surface
Self-tapping
Screw
Advertisement
