Advertisement
Quick Links
6 CORPORATE PARKWAY
,
.
GOOSE CREEK SC 29445
.
.
www quoizel com
PACKAGE CONTENTS
Description
Part
Mirror Hanger
A
B
Lock Screw
Hanger Nail
C
Self-tapping Screw
D
E
Holder
Mirror Frame
F
Mirror
G
!
WARNINGS AND CAUTIONS
CAUTION:
●
These instructions are provided for your safety. It is very important that they are read completely before
the installation of your fixture.
PREPARATION
●
Before beginning installation of product, make sure all parts are present. Compare parts with package
contents list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or
operate the product. Contact customer service for replacement part.
●
Estimated Assembly Time : 15
●
Tools Required for Assembly (not included) : Flathead screwdriver Phillips screwdriver, pliers.
ASSEMBLY INSTRUCTION
STEP 1
:
*
Quoizel recommends 2 people for each step.
.
a Place the Mirror Frame onto a flat working surface with the
back facing you. Carefully locate the Mirror and Backing
into the channels on the Holders (Welded on the Frame).
.
b Locate the another two Holders onto the edge of the Mirror
and Backing, line up holes on the Holders and mounting
holes on the Mirror Frame. Using screwdriver, thread the
Lock Screws into the Mounting Holes on the Mirror Frame
and hand tighten until snug to secure them together.
INSTRUCTION SHEET IS QR787
STYLE NUMBER: QR787
Quantity
1pc
2pcs
2pcs
1pc
2pcs
1pc
1pc
-
30 minutes
1 OF 3
ISSUED 07-2009
A
B
C
D
E
,
Mounting Hole
Holder
Mirror
Frame
-
F
G
Lock Screw
Mirror with
Backing
Holder (Welded
on the Frame)
Advertisement
Related Manuals for Quoizel QR787
Summary of Contents for Quoizel QR787
- Page 1 Tools Required for Assembly (not included) : Flathead screwdriver Phillips screwdriver, pliers. ASSEMBLY INSTRUCTION STEP 1 Lock Screw Quoizel recommends 2 people for each step. Mounting Hole a Place the Mirror Frame onto a flat working surface with the back facing you. Carefully locate the Mirror and Backing into the channels on the Holders (Welded on the Frame).
- Page 2 ASSEMBLY INSTRUCTIONS STYLE NUMBER: QR787 FOR VERTICAL STEP 2 Hanger a Lift and position where the Mirror will reside on the wall surface and with a tape measure, mark distance from floor to the bottom edge of the frame with a pencil. Mark should be located at a point representing ½...
- Page 3 ASSEMBLY INSTRUCTIONS STYLE NUMBER: QR787 FOR HORIZONTAL STEP 6 a Lift and position where the Mirror will reside on the wall Hanger surface and with a tape measure, mark distance from floor to the bottom edge of the frame with a pencil. Mark should be located at a point representing ½...