Booster - BORETTI MLIQX604 Instruction Manual

RECALL FUNCTION
Recall function is a feature which enables recovering power levels and timer settings
after the cooktop has been switched OFF unintendedly. Within 6 s after powering
off the cooktop, all former setting (power levels, timers, heat-up automatic) can be
recovered after a certain user action.
If the cooktop is turned OFF and ON again during 6 s, all former settings (power
levels, timers, heat-up automatic) will be recovered automatically. Recall feature
cannot be disabled by the user via the user menu.
Activation
Cooktop has just been switched off.
• Switch the cooktop ON again via the ON/OFF.
The Pause will flash for 6 s.
• Touch the Pause.
The Recall function becomes active. All power levels, timers and heat-up
automatics set before will be recovered.
BRIDGE FUNCTION
Bridging of 2 cooking zones is the connection of 2 single cooking zones, so they can
be controlled and will behave as one large cooking zone.
There is possible only in the square zone, where is the inscription "bridge".
This enables using cookware which has a larger bottom surface than a single
cooking zone.
Activation
• Touch both cooking zones simultaneously on the display.
The cooking zones are bridged. This is shown by the symbol
De-activation
• Touch both cooking zonezs simultaneously.
The cooking zones are split into 2 separate zones again.
The symbol disappears.

BOOSTER

The booster enables the induction to dissipate a higher power for a cooking zone
than its nominal power for a short period of time (5 minutes).
This is useful to heat-up/boil a great amount of water.
Note: As the booster function may reach high temperatures, it must only be used for
cooking processes using water. Oil or fat may start to burn if booster is used.
Activation
Select the cooking zone a dot (
indicate the selection.
• Type the P symbol on the slider area.
SLIM SK ELECTRONIC
(available only for hob with octa plate)
.) will appear behind the current cooking level to
28
.