Table of Contents
Advertisement
To set a new Date/Time (only with
ignition key at MAR, select "Date and
time" icon and then press "ENTER"
15-fig. 1.
To set day, month, year, hours, min-
utes, mode (12h /24h), rotate the en-
coder 14-fig. 1 to the required set-
ting and then press "ENTER" to con-
firm 15-fig. 1, each field will be acti-
vated in sequence.
Setting "GG": select day rotating
the encoder 14-fig. 1 and press "EN-
TER" 15-fig. 1 to confirm.
Setting "MMM": select month rotat-
ing the encoder 14-fig. 1 and press
"ENTER" 15-fig. 1 to confirm.
Setting AAAA: select year rotating
the encoder 14-fig. 1 and press "EN-
TER" 15-fig. 1 to confirm.
Setting HH: select hour rotating the
encoder 14-fig. 1 and press "ENTER"
15-fig. 1 to confirm.
Setting MM: select minutes rotating
the encoder 14-fig. 1 and press "EN-
TER" 15-fig. 1 to confirm.
Setting MODO (12h / 24h MODE):
select 12h or 24h mode rotating the
encoder 14-fig. 1 and press "ENTER"
15-fig. 1 to confirm.
IMPORTANT During setting,
hours (HH) are always displayed with
24h mode, regardless of set mode.
IMPORTANT If set mode is 24h,
the display shows time using digits be-
tween 0 and 23; if set mode is 12h, the
display shows time using digits be-
tween 1 and 12.
Temperature measure unit can be
set in °C (Celsius) or °F (Fahrenheit).
To set the temperature unit (only
with ignition key at MAR), select
"Celsius/ Fahrenheit" icon and then
press "ENTER" 15-fig. 1.
Rotate the encoder 14-fig. 1 to se-
lect the required unit (°C or °F) and
then press "ENTER" 15-fig. 1 to con-
firm.
To store settings and go back to pre-
vious screen, select "OK" with the en-
coder 14-fig. 1 and then press "EN-
TER" 15-fig. 1.
153
Advertisement
Table of Contents
