Zhongdi 4966 Quick Start Manual

1. Description
ZD-985 is designed for lead free desoldering especially. Its fast heat-up and strong power are
ideal for soldering / desoldering all types of DIP components.
Reasonable structure, single hand operation and strong absorbing power can be easy removal
of the residual solder from the one-sided or two sided of the PCB.
This tool is used in the fields of electronic research, teaching and production, especially in the
repairing and desoldering on the electronic appliances and communications equipments.
1.1 Control Unit
The desoldering gun is controlled automatically by the micro-processor. The digital control
electronics and high-quality sensor and heat exchange system guarantee precise temperature
control at the soldering tip. The highest degree of temperature precision and optimal dynamic
thermal behavior under load conditions is obtained by the quick and accurate recording of the
measured values in a closed control circuit, and this design is especially for the lead-free
production technics.
1.2 Desoldering gun (ZD-552B)
ZD-552B desoldering gun with a power of 80W and a wide spectrum of soldering tips（N5
series）can be used anywhere in the electronics field.
The high power and gun type design make this iron gun suitable for fine desoldering work.
The heating element is made of PTC and the sensor on the desoldering tip can control the
desoldering temperature quickly and accurately.
2. Technical Specification
Code
89-8512
89-8514
Spare parts:
Code
ZD-552B
3. Operating Instruction
3.1 Place the desoldering gun in the holder separately. Then connect the plug to the receptacle
Desoldering Rework Station
Item: 4966/ZD-985
Voltage supply
220-240V~
220-240V~ ESD safe
Voltage Power
24V 80W
Model
ZD-552B 7 pins, with sleep function
NOTE