Table of Contents
Advertisement
en Home Connect
15.5 Deactivating Wi-Fi on the
appliance
Requirements
¡ The Home Connect menu is called
up.
→ "Calling up the Home Connect
menu", Page 41
¡ The display shows on.
Press
to change the setting.
▶
a The display shows oFF if the Wi-Fi
is deactivated.
15.6 Resetting the appliance
network settings
Requirements
¡ The Home Connect menu is called
up.
→ "Calling up the Home Connect
menu", Page 41
¡ The display shows "rES" .
Press and hold
▶
3 seconds.
a The network settings are reset.
15.7 Remote start
Enable the appliance for remote start
via the Home Connect app.
Note
Remote start is deactivated for safety
reasons in the following
circumstances:
¡ The appliance door is opened.
is pressed.
¡
Remote Start is pressed.
¡
¡ Following a power cut.
42
for at least
Activating remote start
Requirements
¡ The appliance is connected to your
home WiFi network.
¡ The appliance is connected to the
Home Connect app.
¡ A programme is selected.
¡ The appliance door is closed.
¡ The refresher tank is not empty.
Press Remote Start .
▶
a Remote Start lights up and the
appliance is enabled for remote
start via the Home Connect app.
Deactivating remote start
Press Remote Start .
▶
a Remote Start goes out.
15.8 Intelligent programme
recommendation
After you have washed your laundry
in the washing machine, the dryer will
recommend a suitable programme
for drying your laundry.
To determine the best drying
programme to use, your appliances
must transmit and receive
information. Observe the following:
¡ The washing machine must be an
appliance with the Home Connect
function.
¡ The washing machine and dryer
must be connected to your home
network and registered in your
Home Connect app.
Using the intelligent programme
recommendation
Press SmartDry .
1.
a The appliance detects a suitable
programme. To cancel or change
the programme recommendation,
set a different programme or
switch the appliance to standby
mode.
Advertisement
Table of Contents
