Table of Contents
Advertisement
en Home Connect
14.4 Activating Wi-Fi on the
appliance
Requirements
¡ The Home Connect menu is called
up.
→ "Calling up the Home Connect
menu", Page 37
¡ The display shows "oFF".
Press
to change the setting.
▶
a The display shows "on" if the Wi-Fi
is activated.
Note: If the Wi-Fi is activated, the dis-
play alternately shows "on" and the
signal strength of the Wi-Fi connec-
tion.
14.5 Deactivating Wi-Fi on the
appliance
Requirements
¡ The Home Connect menu is called
up.
→ "Calling up the Home Connect
menu", Page 37
¡ The display shows "on".
Press
to change the setting.
▶
a The display shows "oFF" if the Wi-
Fi is deactivated.
14.6 Resetting the appliance
network settings
Requirements
¡ The Home Connect menu is called
up.
→ "Calling up the Home Connect
menu", Page 37
¡ The display shows "rES" .
Press and hold
▶
3 seconds.
a The network settings are reset.
38
for at least
14.7 Remote start
Enable the appliance for remote start
via the Home Connect app.
Note
Remote start is deactivated for safety
reasons in the following
circumstances:
¡ The appliance door is opened.
is pressed.
¡
Απομακρ. έναρξη is pressed.
¡
¡ Following a power cut.
Activating remote start
Requirements
¡ The appliance is connected to your
home WiFi network.
¡ The appliance is connected to the
Home Connect app.
¡ A programme is selected.
¡ The appliance door is closed.
Press
Απομακρ. έναρξη .
▶
Απομακρ. έναρξη lights up
a
and the appliance is enabled for
remote start via the Home Connect
app.
Deactivating remote start
Press
Απομακρ. έναρξη .
▶
Απομακρ. έναρξη goes out.
a
14.8 Intelligent programme
recommendation
After you have washed your laundry
in the washing machine, the dryer will
recommend a suitable programme
for drying your laundry.
To determine the best drying
programme to use, your appliances
must transmit and receive
information. Observe the following:
¡ The washing machine must be an
appliance with the Home Connect
function.
Advertisement
Table of Contents
