FD Motors F3-A Instructions Manual page 10

1. Battery SOC: the battery SOC% is controlled by CAN
communication.
LCD display
st
1 segment light on
st nd
1 -2 segment light on
st rd
1 -3 segment light on
st th
1 -4 segment light on
st th
1 -5 segment light on
st th
1 -6 segment light on
st th
1 -7 segment light on
st th
1 -8 segment light on
st th
1 -9 segment light on
st th
1 -10 segment light on
2. Select(H) button: (Unspecified, long press 3 seconds)
2.1 With CAN function, if there is an error code when displaying
ODO, long press Select(H) button to enter the display error code,
the error code is displayed in sequence, if the error is repaired, the
display mode will be exited; if it is not repaired, press Select(H)
button in 5S to exit the error display.
2.2 Adjust backlight brightness: Press Reset to adjust the brightness
of 4 level backlight (100%->75%->50%->25%->100%)
2.3 Press Reset and Select 3S simultaneously to switch metric
system
SOC(%) by CAN
～
10
0
～
20
11
～
30
21
～
40
31
～
50
41
～
60
51
～
70
61
～
80
71
～
90
81
～
100
91
9