Setting Security With The Push Button Method; Create A Network; Add An Extra Homeplug - Sitecom LN-505 User Manual

7. Setting security with the push button method

Instead of using the utility, you might also set security via the 'Security' (LN-
505/515) or 'NMK' (LN-506/507/508/516/517/518/509) button on the Homeplug.
This method is not recommended. We strongly advise you to use the supplied
software to secure your network.

8.1 Create a network

1. Press the pushbutton on the 'Master' for 5~8 seconds.
2. Within 1 minute, press the pushbutton on the 'Slave' for 5~8 seconds.
3. Wait for the connection to complete.

8.2 Add an extra Homeplug

If you have 2 Sitecom Homeplugs in an already secured network and you want a
new device ("Slave") to join the network, please following these steps below:
1. Press the pushbutton on the 'Slave' for 5~8 seconds.
2. Within 1 minute, press the pushbutton on any network device for 5~8 seconds,
making it the 'Master'.
3. Wait for the connection to complete.
Full manual Sitecom LN-505/515/506/516/507/517/508/518/509 Homeplug 20