Advertisement
This machine is commercial machine. This equipment must be operated by trained cook or
professionals.
Do not disassemble and refit it and install it at a slant.
Do not clean the product with a water jet or soak the electric box in water while cleaning.
▪
Before cleaning, please unplug the plug and cut off the power to avoid electrocution.
Do not use another power supply with different voltage.
▪
Do not use main switches that are not coordinated with safety regulations.
▪
Do not put heavy objects onto the machine.
▪
Any abnormal operation or abuse of this machine and failure to follow the guides in this
▪
manual will cause damage and malfunction.
Handle With Care to avoid scalding.
▪
During operation, do not touch the machine.
▪
During a thunderstorm, shut off the main switch to avoid damage by lightning strike.
▪
Do not use hard or sharp objects to destroy the surface of the body and the panel of the
▪
machine.
After using, please shut off the main switch
▪
The installation and maintenance of this machine should be done by professionals.
▪
If power cord is damaged, refer to supplier
▪
Transportation and storage:
During transportation, the machine should be careful handled. Please avoid shaking.
The packaged machine should not be stored in open air. It should be put in a
ventilated warehouse without caustic gas. It should not be put upside down. If it
needs to be stored in open air temporarily, measures to protect against severe
weather is needed.
Daily Maintenance Checks:
Before using:
Whether the machine is tilted?
Whether the power cord is old, broken or damaged?
Whether the control panel is damaged?
After using:
Whether there is strange smell?
Whether the upper and lower module plate cannot be heated at the same
time? Is there any strange sounds?
Stop using if there is suspected problems in the circuit or machine.
Get the machine checked and maintained by a professional as soon as
possible
.
Cleaning and maintenance:
1. Cut off the power supply before cleaning to avoid accidents and hazards.
2. Clean weekly by using a wet towel with non-corrosive cleanser to clean the lower
board, surface of the body and power cord. Do not wash the machine with a water
jet, in the event of water infiltration into the machine, it will destroy the electric
function.
3. When not in use, please turn off temperature controller and main switch.
4. Please store the equipment in a ventilated storehouse without corrosive gas.
.
4
Advertisement
