Control Panel - Peavey Delta Blues User Manual

POWER SWITCH (1)
Switch to "on" position to activate.
PILOT LIGHT LED (2)
Illuminates when AC power is being supplied to the unit.
TREMOLO SPEED (3)
The speed control determines the rate at which the signal is modulated. This control varies the speed of the
Tremolo master oscillator and should provide any speed desired for modern music. Clockwise rotation of the
speed control increases the speed of the modulation of the tremolo. The Tremolo feature is defeatable from a
remote footswitch.
TREMOLO INTENSITY (4)
The intensity control is used to vary the amount of amplitude modulation of the clean signal. It can be
adjusted from barely perceptible to dramatic modulation. Clockwise rotation of the intensity control in-
creases the depth of the tremolo.
EFFECTS RETURN (5)
Input for returning signals from external effects or signal processing equipment.
EFFECTS SEND (6)
Output for supplying signal to external effects or signal processing equipment.
TREBLE, MIDDLE, AND BASS EQ (7)
Passive tone controls that regulate high, mid, and low frequencies, respectively.
BOOST SWITCH (8)
Boosts the overall system gain. Depress to the "in" position to activate.
REVERB (9)
Reverberation is an echo effect. Rotate clockwise to increase the effect.
POST GAIN (10)
Controls the overall volume level of the Lead channel. The final level adjustment should be made after the
desired sound has been achieved.
4