Table of Contents
Advertisement
levels with the Channel Selector/MENU/OK knob. (Levels 00 - 04)
If Talkback is on when MIC Gain is also on, Talkback volume increases.
ƒ Weather: Press to toggle between Weather and CB channels. Turn
Channel Selector to cycle through the 7 weather channels. (LED
off = CB channels; LED on = Weather channels)
Press and hold to turn Weather Alert on and off. ALERT displays.
ƒ Day/Night: Adjusts LCD backlight sensitivity between Day and
Night modes. (LED off = Day; LED on = Night)
6. Channel Selector/MENU/OK. Press the inner MENU/OK button to
select a menu option or other selection. Turn the outer Channel
Selector knob to:
ƒ Select channels
ƒ Select menu modes
ƒ Change scan resume direction (up or down)
ƒ Control Talkback volume
ƒ Control Mic gain level
ƒ Control Calibration volume
All channels except Channel 9 may be used for normal communication. The FCC
reserves Channel 9 for emergencies involving the immediate safety of individuals
or protection of property. Use Channel 9 to render assistance to a motorist.
This is an FCC rule and applies to all CB operators.
7. Microphone socket.
8. Indicators turn on when the function is turned on.
9. S/RF/CAL/SWR: Push to to check RF signal strength, calibration,
and SWR reading.
10. CB/PA: Selects CB (Citizens Band) or PA (Public Address).
Do not use the PA function unless an external speaker is connected.
11. MEM/SCAN: Press to start or stop scanning modes [All Channel
Scan (see page 11) and Memory Scan (see page 13)]. Press
and hold to set or clear channel memory while in Memory mode.
12. 9/19/NORM: Press to switch between emergency channel 9,
channel 19, and standard CB channels.
7
Advertisement
Table of Contents
