Steren 208-900 - TDT SDTV/HDTV Tuner Quick Guide

CAUTIONS

• This product is not intended for use by people (including children), whose physical, sensory or mental abilities are different or reduced, or lack experience or knowledge.
• Children should be supervised to ensure they do not use the product as a toy.
• Turn off the decodifier before inserting or removing video / audio, cables, or if it produces unwanted noise.
• The reception of channels is subject to the region and the place where the decodifier is installed; The signal can be affected by topography, objects and weather.
• Because digital signals are directional, reception difficulties can occur, if the image is fixed or distorted, it must reorient the antenna.

REMOTE CONTROL FUNCTIONS

1. Activate / deactivate standby
2. Recording
3. Saved recordings list
4. Activate / deactivate sound
5. Programming guide
6. General channel information
7. Change HDMI resolution (480/720/1080)
8. Select audio output (Stereo / mono / left / right)
9. No function
10. Timer setting (program automatic channel change)
11. Main menu
12. Exit
13. Next channel / Previous channel
14. Increase / decrease volume
15. Confirm selection
16. List of favorite channels
17. Change TV / Radio tuner
18. Numeric keys (direct channel selection)
19. Return to the previously tuned channel
20. Script for direct channel selection (eg 1-1)
21. Recording playback keys (return or fast forward / go to next or previous recording / start, pause or stop)
22. Activate CC (Closed Caption)
23. Multimedia keys (they have different functions indicated on the screen, according to the menu in which you are browsing)

The remote control uses two "AAA" batteries; Place them in the compartment with the polarity as indicated in the printed icons.

HOW TO TUNE CHANNELS

When you turn on the decoder for the first time, the screen with the Installation Guide will appear. Use the buttons on the remote control to scroll to the Channel Search option and press OK to begin tuning.

Once the search is complete, a screen with the number of TV and Radio channels found will appear; press OK to continue.

In case that you can not find channels or want to search again, press the MENU button. Use the buttons to scroll between the sub-menus until you select Channel Search. Then, scroll to the Auto Search option, press OK, and wait until the search is complete.

CONNECTIONS

HOW TO CHANGE CHANNELS

OPTION 1

The last tuned channel will always be displayed on the screen; if you want to change the channel, use the buttons on the remote control (0-9) to select it directly.

OPTION 2

Press OK to view the available channels and use the buttons to scroll and them; press OK to select one and then again OK to confirm.

SPECIFICATIONS

Specifications may vary without previous notice.

Input: 5 V 2A
Resolution: 480p / 720p / 1080i / 1080p @ HDTV / 480i @ SDTV
Input impedance: 75 Ω
Bandwidth: 6 MHz
Operating temperature: o° - 40° (+32° to 104°F)
Humidity: 20% to 90% no condensing
Storage temperature: - 20 ° - 60°C (20° - 140°F)

Audio signal:
MPEG-1 (layer I and II )
Sample ration: 32 kHz, 44.1 kHz, 48 kHz
Stereo audio output: 1 Vpp ± 10% Video signal:
MPEG-2 MPEG-4
Composite ( CVBS): NTSC, 480i
CVBS level: 1 Vpp ± 10%
HDMI: 480i / 720p / 1080i / 1080p

Remote control:
Input: 3 V (2 x AAA)

AC / DC converter:
Input: 100 - 240 V ~ 50/60 Hz 0.5 A
Output: 5 V - - - 2 A
Nominal consumption: 9.190 Wh
Stand-by power consumption: 0.238 Wh

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Steren 208-900 - TDT SDTV/HDTV Tuner Quick Guide