Download Print this page
HPE FF 12500E MPU Product End-Of-Life Disassembly Instructions
HPE FF 12500E MPU Product End-Of-Life Disassembly Instructions

HPE FF 12500E MPU Product End-Of-Life Disassembly Instructions

Advertisement

Quick Links

Product End-of-Life Disassembly Instructions
Product Category: Networking Equipment
Marketing Name / Model
[List multiple models if applicable.]
HP FF 12500E MPU(JG802A)
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic
instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as
defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
Batteries
Mercury-containing components
Liquid Crystal Displays (LCD) with a surface
greater than 100 sq cm
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or
PCAs already listed as a separate item above)
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and
toner
Components and waste containing asbestos
Components, parts and materials containing
refractory ceramic fibers
Components, parts and materials containing
radioactive substances
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where
components and materials requiring selective treatment can be removed.
EL-MF877-00
Template Revision B
Notes
With a surface greater than 10 sq cm
All types including standard alkaline and lithium
coin or button style batteries
For example, mercury in lamps, display
backlights, scanner lamps, switches, batteries
Includes background illuminated displays with gas
discharge lamps
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
Quantity
of items
included
in product
2
1
0
0
0
0
0
0
0
0
0
0
0
0
Page 1

Advertisement

loading

Summary of Contents for HPE FF 12500E MPU

  • Page 1 Marketing Name / Model [List multiple models if applicable.] HP FF 12500E MPU(JG802A) Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
  • Page 2 Tool Description Tool Size (if applicable) Screw driver 2# Continuous vacuum desoldering system Desoldering tip Damp sponge Flux-cored solder tweezers 3.0 Product Disassembly Process 3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment: Unscrew the screws on pcb 1 and pcb 2,then remove pcb 1 and pcb 2 from front panel 3.
  • Page 3 Figure 1 Explode View of the Front Panel Figure 2 Position Tip EL-MF877-00 Page 3 Template Revision B...
  • Page 4 Figure 3 Melt Solder Figure 4 Move Lead & Apply Vacuum Figure 5 Move Lead & Apply Vacuum EL-MF877-00 Page 4 Template Revision B...
  • Page 5 Figure 6 Lift Handpiece 3.3 Material of the facility built Facility Components Material Weight(g) Weight Selective treatment for Details percentage materials and components Complex PWB The surface lf PCB is 0.12% greater than 10 square centimeters Complex PWB 1732.8 The surface lf PCB is 47.47% greater than 10 square centimeters...

This manual is also suitable for:

Jg802a