Setting Viewing Options; Displaying A Clock With A Calendar And A Slideshow - Pandigital PAN1502W02 User Manual

Setting Viewing Options

You can control all of the viewing options in the Setup Menu using the buttons
on the top of the frame or remote control. You can display the on-screen
Setup Menu at any time by pressing the Setup button. Only available setup
options will be displayed for each screen.
1. With the Select Card or Select Mode screen opens, press Setup to open
the Setup Menu.
2. With the Setup menu open, use the Up and Down arrows to choose a
display option.
3. Press ENTER to select the option. A second menu opens, listing the
available settings. A blue highlight shows the current setting.
4. Use the Up and Down arrows to choose the desired setting.
5. Press ENTER to select the setting. The second menu closes.
6. You can make as many changes as you wish in the same manner. When
you are finished, press the EXIT button to close the Setup Menu and
return to the previous screen.

Displaying A Clock with a Calendar and a Slideshow

You can use your Digital Photo Frame as a desk calendar with a real-time
clock and continuous slideshow. You can also use the Digital Photo Frame as
an Alarm Clock, after setting internal clock.
To Display the Calendar/Clock screen:
1. Open the Mode Selection Screen.
2. Use the arrow buttons to choose Clock and press ENTER. The
Calendar/Clock screen will look similar to the one shown below. The
slideshow displays photos from the currently selected memory source,
and if the alarm is set, on alarm icon appears under the slideshow
window.
17