Wall Mounting Installation - Lenovo Smart Frame Installation Manual

WALL MOUNTING INSTALLATION

1
2
4A
4B
1
2
7
1. Ensure that the level is at the top and the bubble is centered between the guide
lines in a horizontal position
3
2. Mark the 4 drill positions of the mount in the wall with a pencil
3. Use a power drill with a ¼ (6mm) diameter drill bit to drill four holes into the wall
4-6. Hammer the wall plugs* into the four newly drilled holes, align the mounting bracket,
and use a screwdriver to screw in all four strong screws to mount the plate in place
*For brick walls, use brick wall plugs and strong screws (4A, 5)
5
*For drywalls, use drywall plugs and strong screws (4B, 5)
7. Plug the power adapter into the mounting bracket
6
8. Mount the main frame onto the mounting bracket – ensure the Lenovo Smart Frame
pogo pins are aligned with the mounting bracket pogo pins. A clicking sound indicates
8
it has been installed correctly. The wall mounting bracket has a built-in reel, which you
can wind the cord around for cord management.