Page 1
ESD (ENDOSCOPIC SUBMUCOSAL DISSECTION) TRAINING MODEL with storage case LM-083 Instruction Manual Thank you very much for purchasing our ESD Training Model. Please carefully read this instruction manual for a proper use and keep this instruction manual at hand. Table of Contents ...
Page 2
1. Outline This resinoid model respresent almost similar figure of human stomach, and can be used for the training of ESD. Considering the operability of endoscope, the transition part, from esophagus to stomach is made of soft resin. By setting a real dissected stomach of porcine at the area where ESD is supposed to be executed, very similar feeling of human stomach wall can be recognized using endoscope.
Page 3
4. How to Fix Dissected Stomach Caution: Since plate for fixation have sharp-edged part, please pay your attention not to be stuck fingers. 4-1. Stick the electrode on a metal plate for fitting dissected stomach. 4-2. Get out the fixing band through the metal plate for fitting dissected stomach. 4-3.
Page 4
4-4. In order to fix the dissected stomach with the metal plate for fitting dissected stomach, push it against the needle of the metal fitting plate. Using the hollow of the injection needle case. Pull the dissected stomach and fix the dissected stomach with the metal fitting plate to the needle on the diagonal line in the same manner as above.
Page 5
4-5. Put the metal plate fitting the dissected stomach of 4-4. with the stomach model, using the fixing belt. How to fix the belt In case of No.1 through 2, and 5 through 8 In case of No.3 In case of No.4 In case of No.9 - 4 -...
Page 6
4-6. Install the stomach model with the model case. - 5 -...
Page 7
1 copy DVD for installation method of resected porcine stomach 1 copy Storage case 240 (L) x 315 (W) x 225 (H) mm Weight 2.5 kg KOKEN CO.,LTD http://www.kokenmpc.co.jp 1-4-14 Koraku, Bunkyo-ku, Tokyo 112-0004 JAPAN Email: customer@kokenmpc.co.jp - 6 -...
Page 8
Electrode used for ESD Training Model One (1) pc of exclusive electrode for ESD Training Model (applicable for electrode code with clip (P code)) is attached with the model but this electrode is not sold separately. Please use the electrode currently used at your site by processing for ESD Training Model.
Need help?
Do you have a question about the LM-083 and is the answer not in the manual?
Questions and answers