CONTENTS General Safety Product Overview Remote Control First Time Setup Projector Lens Focus Main Menu Dashboard Settings Picture Sound Time Option Specifications Customer Helpline Last Page...
GENERAL SAFETY Read this manual thoroughly before you start using the Projector. Store this manual, the completed warranty card, your receipt and the product packaging. The safety precautions instructions reduces the risk of fire, electric shock and injury when correctly complied to. Please follow all instructions and take notice of all warnings.
Page 5
GENERAL SAFETY (CONT.) Installation Please follow instruction when installing this product in accordance with the instruction manual. This product must be positioned in a sufficiently stable location, it can be potentially hazardous due to falling and can cause injury, particularly to children if it positioned incorrectly.
Page 6
GENERAL SAFETY (CONT.) • Please beware that Dust could accumulate over time on the unit and cause it to generate heat and or deteriorate insulation, which in turn may result in an electrical fire. • The product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or young children of any age, They must be supervised product by a person responsible for their safety.
Page 7
GENERAL SAFETY (CONT.) Please make sure upon positioning this product, the place is: • Not wet or damp and Well ventilated • Away from direct sunlight or heaters. • Away from splashes or food. • Protected from excessive dust or grease. •...
REMOTE CONTROL Your projector comes with a Remote Control to access and control your projector from a distance. (Batteries not included). PLAY/PAUSE POWER MUTE PREVIOUS NEXT RIGHT LEFT DOWN MENU RETURN SIGNAL SOURCE VOL+ VOL- Make sure to place the batteries into the back compartment of the remote control in the correct way.
FIRST TIME SETUP Make sure to place the projector on a flat and stable surface that is level. So that the projector projects the video/image onto the wall nice and straight. Plug in the Power cable into the DC Port of the Projector. Then plug in the other end into a wall power socket.
PROJECTOR LENS FOCUS Once you have your Projector all setup, input mode selected, power turned on. You can now adjust the focus depending on the distance from your projector to the wall. FOCUS Turn the dial to adjust the LENS focus. LEFT DIRECTION - Is toward larger screen sizes best focus point.
MAIN MENU DASHBOARD This is the main menu dashboard that appears when you turn on your projector. Below you have options to choose from: - Home - Music - Text - Movie - Photo - HDMI - Settings...
SETTING - PICTURE PICTURE To Access the setting menu: Press the MENU button located on the on the Remote Control. SETTINGS With the directional keys, go to located on bottom right corner. RIGHT arrow button until you get to PICTURE. Press the...
SETTING - SOUND To Access the setting SOUND menu: Press the MENU button located on the on the Remote Control. SETTINGS With the directional keys, go to located on bottom right corner. Press the RIGHT arrow button until you get to SOUND.
SETTING - TIME To Access the setting TIME menu: MENU Press the button located on the on the Remote Control. With the directional keys, go to SETTINGS located on bottom right corner. Press the RIGHT arrow button until you get to TIME.
Page 17
SETTING - OPTION To Access the setting OPTION menu: MENU Press the button located on the on the Remote Control. With the directional keys, go to SETTINGS located on bottom right corner. Press the RIGHT arrow button until you get to OPTION.
Need help?
Do you have a question about the K720P and is the answer not in the manual?
Questions and answers