CONTENTS General Safety Product Overview Remote Control First Time Setup Install Projector Adjust Focal Length Home Dashboard Settings Picture Sound Option Time Specifications Customer Helpline Last Page...
GENERAL SAFETY Read this manual thoroughly before you start using the Projector. Store this manual, the completed warranty card, your receipt and the product packaging. The safety precautions instructions reduces the risk of fire, electric shock and injury when correctly complied to. Please follow all instructions and take notice of all warnings.
Page 5
GENERAL SAFETY (CONT.) IMPORTANT INFORMATION • Do not expose this appliance to rain or moisture as it may result in fire or an electric shock hazard • Do not tamper or change or modify the product in any way. • Only use Accessories outlined and recommended by the manufacturer. •...
Page 6
GENERAL SAFETY (CONT.) • Please beware that Dust could accumulate over time on the unit and cause it to generate heat and or deteriorate insulation, which in turn may result in an electrical fire. • The product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or young children of any age, They must be supervised product by a person responsible for their safety.
Page 7
GENERAL SAFETY (CONT.) Please make sure upon positioning this product, the place is: • Not wet or damp and Well ventilated • Away from direct sunlight or heaters. • Away from splashes or food. • Protected from excessive dust or grease. •...
REMOTE CONTROL Your projector comes with a Remote Control to access and control your projector from a distance. (Batteries not included). Using the Remote Control • Do not mix old and new batteries in the remote • Do not use different types of battery •...
FIRST TIME SETUP Make sure to place the projector on a flat and stable surface that is level. So that the projector projects the video/image onto the wall nice and straight.
HOME DASHBOARD This dashboard above appears when finish turning on your projector. From here you can select your inputs depending the device you want to project or other media devices and menu options.
SETTING - SOUND SOUND MODES: Set music mode. SURROUND SOUND: Adjust between modes such as...
Page 16
RESTORE FACTORY: Press Yes to reset your projector settings and device. SOFTWARE UPGRADE: Put Firmware into a USB storage device and plug into USB port of projector, Choose Software Update. (please note, only use software upgraded provided by the distributor (help@eko-entertainment.com.au).
Need help?
Do you have a question about the KPS1080WP and is the answer not in the manual?
Questions and answers