The Mini Kreg Jig - Kreg Mini MKJ Instruction Manual

13 13 13
13 13
Setting up the Mini Kreg Jig®
The single drill guide Mini Kreg Jig
tool. The jig is designed without an alignment fence which allows it to be
clamped at virtually any angle or orientation to the edge of a workpiece.
Great in situations where the project is already assembled and in need of
an extra pocket hole or in repair applications such as tightening a chair or
table rail to the leg.
base of jig
Plug Setting Feature

The Mini Kreg Jig

the bottom of the tool that is helpful in
seating pocket hole plugs. Simply start
the plug into the pocket hole and push
into position with the base of the tool.
Saves wear and tear on your hands!
TIP
The Mini Kreg Jig
repair applications and space constrained
areas. One of the most popular uses of
the jig is to tighten a wobbly chair or
table leg as shown in the images at right
without having to spend time re-gluing,
clamping, etc.
chip ejection
hole
® features a recess on
® comes in handy in
is our most positionable pocket hole
®
Setting a plug with the
drill guide
Figure
(18)
Mini Kreg Jig®