Behringer AIRPLAY GUITAR AG10 - High-Performance 2.4 GHz Guitar Wireless System Quick Start Guide
- Quick start manual (2 pages)
Advertisement
Important Safety Instructions
To reduce the risk of electric shock do not perform any servicing other than that contained in the operation instructions. Repairs have to be performed by qualified service personnel.
- Do not expose a power pack to fire or excessive temperature. Exposure to the fire or temperature above 100°C (212°F) may cause explosion.
- Do not expose this product to bright sunshine for a long time.
- Charge it once a month (minimum).
- Do not use this apparatus if it is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
- Correct disposal of this product: This symbol indicates that this product must not be disposed of with household waste, according to the WEEE Directive (2012/19/ EU) and your national law. This product should be taken to a collection center licensed for the recycling of waste electrical and electronic equipment (EEE). The mishandling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the efficient use of natural resources. For more information about where you can take your waste equipment for recycling, please contact your local city office, or your household waste collection service.
![]()
Features
Charging the Battery
| 100% Charged | Approx 75% | Approx 50% | Low Battery |
 |  |  |  |
- The Battery Level LEDs will flash twice when each unit is turned ON.
- Fully charge each unit before using them for the first time.
- If the level is low, attach the supplied dual cords to a computer USB output.
![]()
Do not leave the units unattended while they are charging
Selecting the Channel
| Channel 1 | Channel 2 | Channel 3 | Channel 4 |
 |  |  |  |
- Channel 1 is automatically selected each time the units are turned on.
- Note: Use channel 1 unless you are picking up interference. Each unit must be on the same channel, or they will not operate.
- If required, press SEL on each unit to change to a different channel. All 4 LEDs will flash twice and show the channel LED.
Typical Installation
Clipping Units together
Units can be clipped together for tranportation and storage
Other important information
- Register online. Please register your new Music Tribe equipment right after you purchase it by visiting musictribe.com. Registering your purchase using our simple online form helps us to process your repair claims more quickly and efficiently. Also, read the terms and conditions of our warranty, if applicable.
- Malfunction. Should your Music Tribe Authorized Reseller not be located in your vicinity, you may contact the Music Tribe Authorized Fulfiller for your country listed under "Support" at musictribe.com. Should your country not be listed, please check if your problem can be dealt with by our "Online Support" which may also be found under "Support" at musictribe. com. Alternatively, please submit an online warranty claim at musictribe.com BEFORE returning the product.
LEGAL DISCLAIMER
Music Tribe accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specifications, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Oberheim, Auratone, Aston Microphones and Coolaudio are trademarks or registered trademarks of Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2021 All rights reserved.
LIMITED WARRANTY
For the applicable warranty terms and conditions and additional information regarding Music Tribe's Limited Warranty, please see complete details online at musictribe.com/warranty.
Specifications
| RF Connection | |
| Frequency | 2.4 GHz |
| RF output power | 20 dBm maximum |
| Number of channels | 4 |
| Channel selection | SEL button on each unit |
| Channel indicator | 4 LEDs |
| Range | 30 meters maximum |
| Audio | |
| Frequency range | 20 Hz to 16 kHz |
| Latency | ~ 5ms |
| Digital signal parameters | 24 bit/ 48 kHz |
| Transmitter audio input | 1/4" TS |
| Receiver audio output | 1/4" TS |
| Power Supply | |
| Type | Internal rechargeable 750 mAh Lithium Battery |
| Operating time per battery charge | Up to 6 hours |
| Charging method | Duo-pin USB charging cable supplied |
| Charge status indicators | 4 LEDs |
| Power switch | On/Off slide switch |
| Environmental | |
| Operating temperature range | 5°C – 40°C (41°F – 104°F) |
| Physical (set) | |
| Dimensions (H x W x D) | 40 x 72 x 32 mm x2 (0.13 x 0.24 x 0.10") x2 |
| Weight | 0.045 kg (0.02 lbs) x2 |
Documents / Resources
References
Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Need help?
Do you have a question about the AIRPLAY GUITAR AG10 and is the answer not in the manual?
Questions and answers