Syntech MAX AIR 2271PS-100 User Instructions

CAUTION
!
Before use, thoroughly read MAXAIR
and available at www.maxair-systems.com.
Symbol Definitions
!
Warning, Caution, or Note
Catalog Number
REF
!
WARNING
Failure to follow User Instructions P/N 03521015 and the instructions
contained herein may be hazardous to the user's health.
Use only if package is received unopened and contents are
undamaged. If damage is noted, contact the shipper for replacement
or repair.
Prior to using any MAXAIR
®
familiar with the system's NIOSH approved configuration.
DO NOT use if any component is damaged. If any components are
damaged or contaminated and therefore unfit for safe and effective
use, they should be replaced immediately.
Only trained and experienced personnel who have read and
understand the User Instructions should use MAXAIR Products.
The institution using this product in any application is responsible
for determining the appropriateness of this equipment relative to
regulatory requirements. Bio-Medical Devices Intl, Inc. does not
recommend the appropriate systems for a particular institution or
facility.
Use only MAXAIR Systems/ NIOSH approved compatible
components.
NOT for use in atmospheres immediately dangerous to life or health
(IDLH), and atmospheres containing less than 19.5% oxygen, or
more than 25% oxygen.
Flammability Level I: fabric may burn if exposed to open flame.
Follow current local regulations governing biohazard waste to safely
dispose of single use MAXAIR Products.
If you need more information, contact your BMDI Sales
Representative, or call BMDI customer service at 1-800-443-3842.
User Instructions
®
2271PS-100SM
REF
(Small-Medium)
P/N 08031013
2271PS-100ML
REF
(Medium-Large)
P/N
08031014
NIOSH Number
P/N
System or component, be sure to be
CAPR ® P/N 03521015 User Instruction received with all CAPR Helmets
Intended Use
The MAXAIR CAPR Hood Systems filter aerosolized and droplet
particulates when used with a MAXAIR CAPR Powered Air Purifying
Respirator (PAPR) Helmet.
Hoods are designed for single use applications.
Standard CA-CAPR-36 System with 2271PS-07 DLC
Single Hood
1. 2081-03 Helmet
(includes 2051-07 SnapOn
Cage, 2071-08 Liner, 2590-05
Power Cord)
4. 2500-36TSC Battery*
6. 2600-02 Battery Charger**
*Alternate Batteries include the 2500-37TSC and 2500-30TSC.
**Alternate Charger includes the 2600-01.
Specifications
MATERIAL
Body
(Shroud)
Lens
Hood Filter Polypropylene
HFR FCC
Recommended System Temperature Limits
Use/Handling: 0
Charging: 0
Storage: 0
Regulatory
NIOSH PAPR100-N
DLC Single Hood
1
4 5
2. 2271PS-100 Hood
3. 2061-05 HFR FCC
5. 2000-76 Battery Belt
TYPE
Polypropylene/ ASTM F1671
Polyethylene
Polycarbonate Impervious
AATCC TM127 ≥50cm H
Polypropylene/ Impervious
modacrylic blend
C to 54 C at a maximum 80% Relative Humidity.
o 0
C to 45 C at a maximum 80% Relative Humidity.
o 0
C to 35 C at a maximum 80% Relative Humidity.
o 0
2271PS-100
2 3
6
FLUID RESISTANCE
O
2
P/N 08023020 Rev B Page 1