Advertisement
FILLING WATER TANK AND SWITCHING ON
1.
Lift the water tank off using two hands.
2.
Turn the water tank upside down and unscrew the water tank cap. The cap forms
part of the water filter which helps to eliminate contaminants in the water.
3.
Fill the water tank with cold water.
4.
Screw the water tank cap back onto the tank.
5.
Place the water tank back onto the base. Be sure to align the base correctly so it
secures into place.
6.
Turn the humidifier on by turning the dial clockwise. The power indictor light will
turn green.
7.
Within a few seconds the mist will start coming through the mist lid. Use the
control dial to control the intensity of the mist.
Note:
When the humidifier is low on water the power indicator light will turn red and
the mist will stop.
Do not move the humidifier once you have
installed the water tank onto the base as this
could cause water to leak.
REPLACING THE FILTER
The ion-exchange resin filter is designed to
remove impurities from the water and ensure
it stays clean for as long as possible. We
recommend replacing your filter at least once
every 6 months or 500 hours of use. The filter
forms part of the water tank cap so to
replace it, simply unscrew it from the water
tank and install the replacement.
3 | English
Advertisement
