Download Print this page

Advertisement

Quick Links

BEFORE YOU GET
We're confident you' ll love your gorgeous new Next
furniture. However, it's worth making absolutely certain
So, let's quickly run through these three steps:
No need to unpack everything, just check the first component.
If you're happy, then it's time to get opening!
on the protective packaging – this will prevent anything getting scratched.
Finally, double check you have all the pieces by referencing
Not completely happy with the product? No problem.
We just need everything back in the original packaging, so follow the steps below
and this will ensure a super-smooth returns process and no delay to your refund.
DO
• Check everything is there (the 'parts page'
is a handy checklist).
• Pop all the loose fittings and fixtures into
the packaging provided or tie them up in a
plastic bag.
• Wrap all the big components back
up in the original protective packaging.
• Close up the box and seal it securely
(don't be afraid to use plenty of tape).
Then just give us a call on 0333 777 8999 and we'll sort out a pick up time for you.
STARTED...
before you put it all together.
1. COLOUR
Make sure you're happy with the colour
2. PROTECTIVE PACKAGING
3. PARTS PAGE
the parts page of the instructions.
TIPS FOR RETURNS
Start by laying everything out
DON'T
• Leave anything assembled -
all components should be dismantled
and separately packed.
• Put loose fixtures and fittings straight
into the box.
• Throw it back in the box carelessly –
as it may get damaged.

Advertisement

loading
Need help?

Need help?

Do you have a question about the LACEY 326364 and is the answer not in the manual?

Questions and answers

Summary of Contents for Next LACEY 326364

  • Page 1 BEFORE YOU GET STARTED... We’re confident you’ ll love your gorgeous new Next furniture. However, it’s worth making absolutely certain before you put it all together. So, let’s quickly run through these three steps: 1. COLOUR Make sure you’re happy with the colour No need to unpack everything, just check the first component.
  • Page 2 LACEY BEDSIDE 326364 H56.5xW46xD36cm 326364-2019-V1...
  • Page 3 LACEY BEDSIDE 326364 For self-assembled products, please periodically check all fittings and re-tighten as necessary. Tools required For self-assembled products, we recommend that the packaging is used to protect the surfaces during assembly. unpacked The glass used in this product is toughened and complies with BS EN 12150, BS EN 12521,BS EN 4875 and BS EN 14749.
  • Page 4 LACEY BEDSIDE 326364 46x36x18cm 42x30.5x1.5cm 40x7x2.5cm 326364-2019-V1...
  • Page 5 LACEY BEDSIDE 326364 65X25MM 12X28MM 16X1MM 13X2MM 15X10MM 65X23MM 326364-2019-V1...
  • Page 6 LACEY BEDSIDE 326364 326364-2019-V1...
  • Page 7 LACEY BEDSIDE 326364 60%tighten 65X23MM 15X10MM 326364-2019-V1...
  • Page 8 LACEY BEDSIDE 326364 326364-2019-V1...
  • Page 9 LACEY BEDSIDE 326364 100%tighten 100%tighten 12X28MM 65X25MM 16X1MM 13X2MM 15X10MM 65X23MM 326364-2019-V1...
  • Page 10 LACEY BEDSIDE 326364 If your floor is not level, the feet on the unit should be adjusted to prevent it from rocking. Place the unit in its final position and unscrew any feet that are not in full contact with the floor. The unit should then be checked for level in left-right and front-back directions with a spirit level and further adjustments made as required.
  • Page 11 LACEY BEDSIDE 326364 To remove drawers: 326364-2019-V1...
  • Page 12 LACEY BEDSIDE 326364 To replace drawers: 326364-2019-V1...
  • Page 13 LACEY BEDSIDE 326364 Once the item is in its final position,correct the fit of the drawers by sliding the adjusters under the drawer box: Press down the slider,moving it outward will raise that side of the drawer, and moving it inward will lower it. 326364-2019-V1...
  • Page 14 LACEY BEDSIDE 326364 WALL STRAP SCREW 326364-2019-V1...
  • Page 15 LACEY BEDSIDE 326364 H56.5xW46xD36cm 326364-2019-V1...