Recorder Connections; Notice About Recorder Connections; When Using A Recording-Only And A Playback-Only Decks; When Recording And Playing Back With One Deck - Panasonic WR-XS3 Operating Instructions Manual

RECORDER CONNECTIONS

When you connect a cassette tape recorder or MD recorder to record the broadcasting, confirm the following:

Notice about Recorder Connections

Howling can occur depending on the connection form or connected devices. Connect the recording devices either of the fol-
lowing ways:
When Using a Recording-only and a
Playback-only Decks
The unit 's REC OUT will be used for the recording output
line.
• Connect the unit's REC OUT with the recording deck's
REC IN.
• Connect the unit' s STEREO INPUT or MULTI INPUT ST
jacks with the playback deck's stereo output connector.
When Recording and Playing Back
with One Deck
The unit' s SUB OUTPUT jack will be used for the recording
output line.
• Set the DIP switch of the assigned input line to ON.
• Connect the unit' s SUB OUTPUT and the recorder's
recording output connector with a recommended type
of cable. (Refer to p. 13 for details on cable informa-
tion.)
• Connect the unit' s STEREO INPUT, MULTI INPUT ST or
LINE IN jack(s) and the output connector of the play-
back deck.
Note: This connection implements monaural recording, as stereo input signals are mono mixed to be output through SUB
OUTPUT jack.

Using a Recording-only and a Playback-only Decks

A recording-only and a playback-only decks are used.
1. Connect the playback-only deck to the STEREO INPUT 1 to 4 jacks or the MULTI INPUT ST jack.
2. Connect the recording-only deck to the REC OUT jack.
MODE
SELECT
24
REC OUT
ON PIN CONNECTION
ST
No. 1: GND
OFF ON No. 2: HOT L L
OFF
ST AUTO MUTE No. 3: COLD
3 4
R L
A B 4 3 2 1 4 3 2 1
1
STEREO MONO R R
2
INPUT SELECT
3
MODE SUB MONO STEREO –10dBV 10k +4dB 10k –10dBV 10k –45dB 10k
REC OUT SUB IN MULTI INPUT
OUTPUT +4dB 10k
You want to play back and
record the broadcasting on
the cassette tape or MD.
You do not use SUB
OUTPUT jack.
Mono recording is OK.
You can record and play
back with one deck.
REC
Recording only deck
PLAY
Playback-only deck
STEREO INPUT 1 to 4
MONO 4 3 2 1 4 3 2
L
R
ST 3 4 AUTO MUTE
STEREO INPUT –10dBV 10k MONO INPUT –60dB to –10dB 10k
NO
YES
NO
YES
0dB is referenced to 0.775Vrms
1
SIGNAL
AC IN
GND
Ser No.
Use a recording deck and
playback deck.
Use a recording deck and
playback deck.