Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Hay ANAGRAM TABLE LAMP
Summary of Contents for Hay ANAGRAM TABLE LAMP
- Page 1 – INSTRUCTION MANUAL – ANAGRAM TABLE LAMP DESIGN BY SAM WELLER...
-
Page 3: General Information
Ensure that the power supply has POWER (W) | 5-8W been turned OFF before cleaning the product. COLOUR TEMPERATURE | Warm white. HAY will not accept any responsibility for any accidents, injuries or damages that occur due to the use of incorrect bulbs. ATTENTION... - Page 4 – PARTS – – PARTS – Shade Body EU Plug US Plug UK converter...
- Page 5 Unpack all the parts and check that you have received all the parts listed. Begin by placing the lamp body on a flat surface. Place the shade on top of the lamp body, aligning the two thumb screws in the shade with the corresponding guiding slots in the lamp body as pictured below.
- Page 6 Once the shade is resting on top of the lamp body, tighten the two thumb screws underneath the shade to attach it to the lamp body. Do not overtighten but make sure that the shade is properly fastened to the lamp body.
- Page 7 Insert two E14 (EU) or two E12 (US) LED bulbs into the fittings.
- Page 8 Plug the cable into a power outlet. Use the toggle switch, centred under the shade, to turn the lamp on. The lamp is now ready to use.
- Page 9 – UK CUSTOMERS ONLY – Please note that for UK customers, the lamp will come supplied with a pre-mounted UK converter. The UK converter will be mounted over the existing EU plug, so the lamp is compatible and ready for use with UK sockets. If not pre-mounted, please follow the below instruction.
-
Page 10: Care And Maintenance
Please find our Care & Maintenance guide by scanning the QR code You can find more relevant information on Anagram Table Lamp by scanning the QR code You can also find the same information here hay.dk/downloads... - Page 12 Havnen 1 8700 Horsens Denmark +45 3164 6000 / hay@hay.com www.hay.com 12/01/2023...
Need help?
Do you have a question about the ANAGRAM TABLE LAMP and is the answer not in the manual?
Questions and answers