Fast Forward - Panasonic WJ-SX150 Series Addendum

TIME-LAPSE VCR CONTROL
A time-lapse VCR (Panasonic Models) is operable with the
system controller, while connecting to the matrix switcher.
Note: Before the use, it is necessary to install the
Multiplexer board in the matrix switcher, connect
the matrix switcher to the time-lapse VCR, and con-
figure the system through WJ-SX150A Administrator
Console, OSD SETUP MENU, and time-lapse VCR's
SETUP MENU. (Refer to the operating instructions
of matrix switcher.)
The following is the procedure of a Panasonic model time-
lapse VCR.
■ Controlling the Time-lapse VCR
The following are the operating procedures of the time-
lapse VCR via system controllers.
● Multiscreen Segment Switching
The operations are the same as WJ-HD500 Series.
(Refer to p. 19.)
Note: 7-, 10-, and 13- segment multiscreen display pat-
terns are unavailable.
● Normal Playback
The operations are the same as WJ-HD500 Series.
(Refer to p. 19.)
Note: You cannot skip to the previous/next record.
● Fast-forward
1. During the stop, execute System Function 11. (Refer to
the operating instructions of system controller for how to
operate.) The tape will be fast-forwarded.
2. To stop fast-forwarding, press the STOP button.
Note: Pressing the PLAY/PAUSE button during fast-for-
ward will start playback.
34
[PANASONIC MODELS] (TERMINAL MODE)
MUX
● Rewind
1. During the stop, execute System Function 12. (Refer to
the operating instructions of system controller for how to
operate.) The tape will be rewinded.
2. Press the STOP button to stop rewinding.
Note: Pressing the PLAY/PAUSE button during rewind
will start playback.
● Manual Recording
The operations are the same as WJ-HD500 Series.
Refer to p. 20 Manual Recording.
● Stopping REC ONLY Alarm
Recording
The operations are the same as WJ-HD500 Series. Refer to
p. 20.