E Series two-way loudspeakers and subwoofers are designed for externally powered operation. Pass-throughs permit connection to multiple loudspeakers. The
two-way models feature internal passive crossovers for full-range operation. To use them with subwoofers, use an active crossover and separate amplification to
split the subwoofer frequencies and the remainder of the audio spectrum.
PLD and GXD Series amplifiers have E Series voicings available in their presets and loudspeaker profiles. TouchMix digital mixers also have E Series voicings
available, for use in systems that don't have PLD or GXD Series amplifiers.
E Series E110, E12, E15, E215 Block Diagram and Input Plate
E Series E18sw, E218sw Block Diagram and Input Plate
Multi-use loudspeaker all-weather 80 mm (3.1”) two-way with shielded woofer and neodymium tweeter with 70v/100v transformer equipped (bypassable) (9 pages)
Summary of Contents for QSC E Series
Page 1
PLD and GXD Series amplifiers have E Series voicings available in their presets and loudspeaker profiles. TouchMix digital mixers also have E Series voicings available, for use in systems that don't have PLD or GXD Series amplifiers.
Page 2
Connections Full Range Stereo System Amplifier Speaker GXD Series power amplifier preset: P6 ST E110 (stereo E110) GXD Preset P10 ST E12 (stereo E12) ST SAT FULLRANGE P12 ST E12 DANCE (stereo E12 dance) P14 ST E15 (stereo E15) Input P16 ST E15 DANCE (stereo E15 dance) Amplifier Speaker...
Page 3
Single Channel, Sub / Satellite Option 2 Amplifier Speaker Cross-wired 1 - 2, 2 - 1 GXD Preset SUB SAT nn HZ Input GXD Series power amplifier preset: P3 SUB SAT 80HZ Amplifier Speaker — Figure 5 — Dual Channel, Sub / Satellite System GXD Series power amplifier preset: P7 ST E110 + SUB To Right...
Page 4
Dual Channel, Sub / Satellite System with 4-channel PLD PLD Series power amplifier preset: F11 Dual bi-amp mode PLD Series power amplifier loudspeaker profiles: CH A • E18sw • E218sw CH B • E110 +SUB • E12 +SUB • E12 dance +SUB •...
The E18sw subwoofer uses a kit of four 3-inch casters with 16 mounting screws, QSC part number FG-000972-00 (one kit needed per subwoofer). The E218sw subwoofer uses a kit of two locking and two non-locking 4-inch casters with 16 mounting screws, QSC part number FG-901156-00 (one kit needed per subwoofer).