Table of Contents
Advertisement
Board Mounting Procedure
The following example is the procedure to mount a network
board into the OUT X-1 slot of WJ-SX650 Series.
Notes:
• This network board can be inserted into the OUT X-1
slot only.
• Before the procedure, power off WJ-SX650 Series.
• Remove the screws and fixing brackets surely when
dismounting.
• Fix the screws surely when mounting.
• Do not hit the boards against the chassis of WJ-SX650
Series.
1. Remove the front panel by loosening the screws.
2. Dismount the video output main board from the front
side.
Fixing brackets (x4)
Screws (x8)
3. Dismount the OUT X-1 board from the rear side.
1
DAT A
2
L5
DAT A
TMN
DAT A
3
L6
1/PS
DATA
TMN
TMNL
DAT A
4
3/TM
NL7
TMN
L2
HDR
4/TM
NL8
1/TM
NL3
d 2
HDR
NL4
HDR
ut Boar
2/TM
Vide o
Outp
d 1
HDR
ut Boar
Vide o
Outp
Video output main board
TERM.
ON
OFF
ON
TERM.
OUT X-1 board
MODE
MODE
Fixing brackets (x2)
Screws (x2)
4. Mount the network board into the OUT X-1 slot, and fix
the board with the supplied screws.
.ON
TERM
TERM
.OFF
ON
DAT A
1
MODE
DAT A
2
L5
MODE
TMN
3
L6
S DATA
DAT A
TMN
TMN L1/P
4
NL7
L2
DAT A
HDR
3/TM
TMN
NL8
1/TM
NL3
HDR
4/TM
HDR
d 2
NL4
ut Boar
HDR
2/TM
Vide o
Outp
d 1
ut Boar
Vide o
Outp
5. Mount the video output main board by hooking the
board stoppers on the board stopper angles at the front
side, by pushing down the board stoppers, and by fix-
ing the screws. Then, attach the front panel.
Fixing brackets (x4)
Screws (x8)
• Mount the main board into the slot.
• Fix the board with the screws (x3).
• Attach the fixing brackets (x4) with the screws (x8).
Note: When mounting, insert the main board surely into
slits.
Network board
Board stopper angle
Board stopper
Hook the board stoppers
on the board stopper angles, and
push down the board stoppers.
3
Advertisement
Table of Contents
