Create A Setup File Newly - Panasonic WJ-ND300 Administrator Console Operating Instructions Manual

Create a Setup File Newly

Create a setup file newly as follows. The default setting values will be applied for a newly created setup file.
Screenshot 1
Operate using the buttons on the tool bar on the opera-
tion window.
Screenshot 2
The version selection window will be displayed.
Important:
When creating a new setup file while the other setup file is being edited, the following window will be displayed.
When the [Yes] button is clicked, the newly opened
setup file will overwrite the setup file currently being edit-
ed (with the default setting values).
When the file currently being edited is to be saved, click
the [No] button to cancel creation of a new setup file.
Save the edited setup file first and then create a new
setup file.
Step 1
Click the [New] button on the tool bar.
Step 2
Select the version of the WJ-ND300 currently in use.
Step 3
Click the [OK] button.
A new setup file will be created and the top page of the
operation window will be displayed.
21