Subscribe to Our Youtube Channel
Related Manuals for Motion 4 Doors EvoDrive+
Summary of Contents for Motion 4 Doors EvoDrive+
- Page 1 EvoDrive+ USER MANUAL Part 3 of the Installation, User and Maintenance Manual This section must be given to the User of the automatic door v3.0.0...
-
Page 2: Table Of Contents
INDEX PART 3 USER MANUAL 1. PRODUCT DESCRIPTION ........................4 2. INSTRUCTIONS OF USE ........................4 2.1. OPERATING MODES ................................4 2.2. OPERATION DURING POWER FAILURE ..........................4 2.3. DOOR CLEANING ..................................5 2.4. RESTRICTIONS OF USE .................................5 3. RISK ASSESSMENT ..........................6 3.1. IDENTIFICATION OF DANGEROUS AREAS ........................6 3.2. - Page 3 PART 3 User manual This part of the manual explains the operating and safety considerations, to be taken into account by the end user. It is very important to read this manual in full, and to observe and follow all instructions as described herein.
-
Page 4: Product Description
1. PRODUCT DESCRIPTION This door is equipped with the EvoDrive+ automatic sliding door operator, specifically designed for interior doors. Equipped with the latest technology in automatic doors, the leaves are moved by a linear motor that slides with the door leaf by attraction and repulsion of the permanent magnets incorporated along the header frame, making the operator a very compact unit, with a superb, smooth and silent movement. -
Page 5: Door Cleaning
2.3. DOOR CLEANING To clean the door, press button “Open” on the remote control to set the door to “Open” mode, then slide the door leaf manually to any position. In this mode, the activation devices will remain disabled, and the door is safe for cleaning. -
Page 6: Risk Assessment
Only authorized technicians are allowed to open the cover of the door operator and manipulate the internal parts, for installation and maintenance purposes. The power switch must be turned off before doing any intervention on the door operator. End users and non-qualified technicians are strictly not allowed to open the cover and/or manipulate the internal parts of the door operator. - Page 7 IMPACT CRUSH SHEARING ENTRAPMENT HOOKING USER MANUAL...
-
Page 8: Residual Risks
3.2. RESIDUAL RISKS Although the EvoDrive+ automatic door operator has been designed and manufactured to ensure a safe operation, some residual risks may still persist even after adopting complementary measures of protection. Automatic sliding doors may have some risks of crush, impact, entrapments and other potential hazzards. Depending on the structural conditions on site, the door version and the safety equipment, these risks may not disappear completely. -
Page 9: Technical Specifications
5. TECHNICAL SPECIFICATIONS MECHANICAL FEATURES Clear opening width, single leaf (mm): 750 - 1400 Clear opening width double leaf (mm): 1500 - 2800 Operator length, single leaf (mm): 1650 - 2850 Operator length double leaf (mm): 3100 - 5700 MAIN FEATURES Opening speed: adjustable between 200 and 600 mm/s Closing speed: 200 mm/s EN16005 “Low Energy”... -
Page 10: Automatic Door Operator Ce Declaration Form
6. AUTOMATIC DOOR OPERATOR CE DECLARATION FORM DECLARATION OF CONFORMITY Directive 2006/42/CE -Directive on Machinery- We hereby declare, under our sole responsibility, that the product and model described here in is conform to the essential health and safety requirements as described in the following directives issued by the European Council for the harmonisation of the legal norms in all countries members of the European Union: Product: Automatic door operator for sliding doors... - Page 11 ADDRESS CONTACT Linear Motor Applications, S.L. Tel.: +34 935 624 639 Pol. Ind. Santiga E-mail: info@motion4.eu Pasaje Arrahona 4, Nave 1 www.motion4.eu 08210 Barberà del Vallès Barcelona, Spain...
Need help?
Do you have a question about the EvoDrive+ and is the answer not in the manual?
Questions and answers