Table of Contents
Advertisement
18
OPERATING INSTRUCTIONS
c. Insert the female threaded end of the hose
onto the drain connector of the unit. (fig.2)
d. Screw the garden hose onto the threaded
portion of the drain connector. (fig.3)
e. Make sure the hose is secure so there are
no leaks.
f. Direct the hose toward the drain, making
sure that there are no kinks that will stop
the water flowing.
g. Place the end of the hose into the drain.
(fig.4)
h. Select the desired humidity setting and fan
fig. 2
speed on the unit for continuous draining
to start.
1. Check the seal between the hose and the
drain connector. If there is a small leak
then
re-tighten the hose.
2. It is recommended that a Dehumidifier
Drain Hose - 1/2" (12.7 mm) or larger be
used. Make sure there are no kinks or
elevations in the hose.
3. When a hose is not attached to the drain
connector, please ensure drain cap is
screwed securely to the connector to
prevent leakages.
fig. 3
NOTE
replace
the
hose
fig. 4
gasket
and
Advertisement
Table of Contents
