Advertisement
Installation
1
Install the mounting bracket of the monitor station using the wood screws (4 mm × 16 mm,
3
5
/
" ×
/
") to the holes.
16
8
L Remove the mounting bracket and wood screws from the rear of the monitor station
beforehand.
2
Run the wires from the door station through the unit, then to the monitor station.
3
Run the power cable through the unit and the power cable clamp.
4
Mount the monitor station to the mounting bracket, and push down until it is secure.
Technical data about this product
Dimensions:
Mass (Weight):
Installation method:
External material:
Wood screws
Wire
Mounting bracket
Power cable
Approximately height 157 mm × width 145 mm × depth 160 mm
3
11
(6
/
" × 5
16
Approximately 180 g (0.39 lb.)
Desktop type
ABS resin
5
/
" × 6
/
")
16
16
Desktop stand
Power cable clamp
Advertisement
