Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Frontpoint Smart Chime
Summary of Contents for Frontpoint Smart Chime
- Page 1 SMART CHIME USER GUIDE...
-
Page 2: Table Of Contents
Meet your Frontpoint camera’s new best friend. Required for the Wireless Doorbell Camera to create the ringing tone when someone is at your door, the Smart Chime also boosts Wi-Fi to help maintain a steady connection for any connected Frontpoint camera. -
Page 3: Installation And App Setup
(recommended) To add the Smart Chime to your Frontpoint account, follow the steps below: Plug the Smart Chime into an outlet near your Wi-Fi router*, ideally 5 to 10 unobstructed feet (or no more than 4 physical steps) away. - Page 4 A. Once available, connect to the “Chime Config (XX:XX:XX)” network by using the Wi-Fi password (Wi-Fi PW) from the sticker included with the Smart Chime- indicated in green below. *The Wi-Fi password can also be found on the back of the Smart Chime.
- Page 5 Once successfully connected to the Chime Config (XX:XX:XX) network, it will appear like this on your phone, with an indication that internet connection is not available: i. If you’re having trouble staying connected to the Chime Config. network, your phone may be defaulting back to your home network. Press “Forget This Network”...
- Page 6 INSTALLATION AND APP SETUP (Continued) Scan the code to the right with the camera on your mobile phone or type “192.168.173.1” into the URL bar of your mobile phone’s web browser to be directed to the Wi-Fi setup web page. *If your browser indicates “no connection”...
- Page 7 Router LED will turn solid. (Your phone’s Wi-Fi will now switch back to your original network as well.) A. If the “Router LED” doesn’t start blinking, try moving your Smart Chime closer to your router and starting from step #1 of the setup.
- Page 8 Tap “Enter MAC Address” at the bottom of the page. Manually enter the Smart Chime’s MAC Address found on the included sticker (or on the back of the Smart Chime), as indicated below in green. Tap “Install” and enter a name for your Smart Chime.
- Page 9 If desired, move the Smart Chime closer to the location of the camera(s) you intend to connect with: A. Place the Smart Chime no further than 20 feet from your router (or no more than 8 physical steps) and try to place them at a similar height.
-
Page 10: Configuration
CONFIGURATION After installing your Smart Chime, you can customize and test its volume and tone in the Frontpoint app. Log into the Frontpoint app on your mobile phone. Tap the navigation menu ( ) in the left-hand corner. Select Manage Devices. -
Page 11: Connecting Your Cameras
Pre-installed cameras: If your camera is already attached to your system prior to setting up the Smart Chime, the camera must first be removed. Log into the Frontpoint app on your mobile phone. - Page 12 “Chime (XX:XX:XX)” listed at the top of the page under “Access Points”. (The X’s are indicative of the MAC address and will vary.) When the Smart Chime’s “Devices LED” (see page 13) becomes solid your camera has successfully paired.
-
Page 13: Led Reference Guide
LED REFERENCE GUIDE 1. Power LED Router LED Devices LED Pairing LED Speaker Reset Button Pairing Button... - Page 14 LED REFERENCE GUIDE (Continued) Power Router Off - Device is powered off Off - No connection to router or internet On - Device is powered on On - Connected to internet Blinking - Device is booting up Blinking - Connected to router, no internet Devices Blinking (five quick blinks) -...
-
Page 15: Troubleshooting
TROUBLESHOOTING If you’re having issues with either the setup or operation of the Smart Chime, please scan the QR code below for answers to a range of questions such as: • How can I complete the installation without my Wi-Fi password? •...
Need help?
Do you have a question about the Smart Chime and is the answer not in the manual?
Questions and answers