Profile Design AIRSTRYKE II AEROBAR Manual page 3

Airstryke II Aerobar
Your Aerobar kit should contain:
• Two (2) aerobar upper brackets (aluminium) with spring loaded wings
• Two (2) aerobar lower brackets (aluminium half round)
• Four (4) M6x18 bolts with washers
• Two (2) M6x15 bolts preinstalled in the lower bracket with washers
• One (1) Airstryke extension
• Two (2) cable exit plugs
• Two (2) Ergo armrests with hook and loop stickers (plastic)
• Two (2) Ergo 10mm armpad cushions (foam)
• Four (4) M6x13 countersunk bolts
Optional accessories compatible with this Aerobar:
• Swiftshift kit
• Ergo+, Race+ and Boom armrest kits
If anything is missing from the aerobar kit please contact your dealer.
Please note that threaded areas have been pre-treated by Profile Design during production with a special blue thread locking compound. This special
compound is easy to detect on the threads of all bolts provided. If you cannot detect this thread locking compound or if you have cleaned it off through
normal maintenance, re-apply a suitable blue thread locking compound as available from Loctite® or another company before assembly.
2