Advertisement
4. Timer
■ Timer functions are different by each remote controller.
■ For details on how to operate the remote controller, refer to the appropriate operation manual included with each remote controller.
5. Emergency Operation for Wireless Remote-controller (option)
HEAT
6. Filter Preparation
• Install an optional filter or a locally procured filter at the air inlet.
For the filter installation or maintenance procedures, see the usage
instructions for the filter.
ON/OFF
①
②
COOL
① ON/OFF lamp (lit when unit is operating; unlit when unit is not
operating)
② Emergency operation
In cases where the remote control unit does not operate properly, use
either the
COOL or
HEAT button on the wireless remote control
signal receiver to toggle the unit on or off. On cooler only units,
pushing the
HEAT button toggles the fan on and off.
Pressing the
COOL or
HEAT button selects the following settings.
Operation mode
Preset temperature
24 °C/75 °F
Fan speed
COOL
HEAT
24 °C/75 °F
High
High
9
Advertisement
