Related Manuals for HOTO QWXCJ002
Summary of Contents for HOTO QWXCJ002
- Page 1 User Manual for HOTO 20V Pressure Washer Pro WARNING! You must read this manual thoroughly before using HOTO 20V Pressure Washer Pro! Stay tuned to our social media (@hoto_official)
-
Page 2: Product Overview
01 Product Overview Thank you for using HOTO 20V Pressure Washer Pro. Read this manual carefully before use, and retain it for future reference. Battery Level Multi-Function Nozzle Handle Water Inlet Filter Display Button Spray Lance Trigger Hose Inlet Water Inlet... -
Page 3: Component Assembly
02 Operating Instructions Component assembly Install the battery pack： Align the "●" mark on the handle with the " " mark on battery pack. Rotate battery pack 90 degrees in the arrow direction so that the "●" mark is aligned with the "... - Page 4 Connection of the hose inlet: Plug hose inlet into water inlet as shown. Assembly of the soap holder: Align soap holder with the slot in spray lance in the arrow direction. Rotate it about 45 degrees in the arrow direction to lock soap holder.
-
Page 5: Disassembly Of Components
Disassembly of components Disassembly of the battery pack: Rotate battery pack 90 degrees in the arrow direction so that the "●" mark is aligned with the " " mark; Remove battery pack downward. Disassembly of the spray lance: Press and push backward spray lance in the arrow direction, and then rotate spray lance 90 degrees in the arrow direction and draw it out. - Page 6 Disassembly of the hose inlet: Hold hose inlet at its largest diameter position in the upper part, and then pull it out downward. Disassembly of the soap holder: Rotate soap holder 45 degrees in the arrow direction。 Remove soap holder in the arrow direction.
- Page 7 How to use Connect the water pipe: Put hose inlet into a bucket and fix it to the edge of the bucket with hose clip. Connect water inlet filter. Change the water type: Rotate the shell of multifunctional nozzle to align the arrow "●" with the corresponding mark on the shell to change the water type.
- Page 8 Add detergent: Remove soap holder, add detergent or car washing liquid (powder), and then close the soap holder. Self-lock the start button: Switch trigger down to the " " mark to self-lock the button (so that the motor will not work if trigger is pressed). Restore trigger to the "...
- Page 9 Battery pack: The USB-C interface of the battery pack supports the two-way fast charge with an output of 40 W MAX USB-C. The USB-C port supports the fast charging input of 40W MAX. The USB-C port supports the fast charge output of 40 W MAX, thus providing the fast charging experience in a more efficient manner.
-
Page 10: Safety Precautions
During Charging Battery level 100%: Press the battery level display button, and four indicators will remain on for 20 seconds and then go off. Battery level 100%: The total four indicators remain on for 20 seconds and then go off. Battery level 75%‒100%: Indicators 1, 2, and 3 remain on, and indicator 4 blinks. -
Page 11: Safety Warnings For Battery Pack
Safety Warnings for Battery Pack Do not open or shred the battery pack. Do not expose the battery pack to heat or flames. Keep the battery pack away from direct sunlight. Do not short-circuit the battery pack. Do not store the battery pack in a box or drawer without precaution. -
Page 12: Specifications
04 Specifications Model: QWXCJ002 Rated Pressure and Flow Rate: Item Dimensions: 545×244×84 mm Self-priming Way: Net Weight: 1.5 kg Jet mode/Tilted mode/20-degree/40-degree Rated Input: Water Mode: 10W/9V 18W/12V 24W/ Pressure 18 ± 2 Bar, flow rate 160 ± 20 L/H... -
Page 13: Care And Maintenance
05 Care & Maintenance Please disassemble the relevant components from the washer before performing the maintenance. Please check whether the washer and components are damaged before each use. If any, stop using the washer and contact the supplier or manufacturer to replace the damaged compo- nents. -
Page 14: Troubleshooting
06 Troubleshooting Issues Possible Causes Solutions The washer is too much Lower the washer till it is 1.5 m below the higher than the water water surface level. surface level. The washer starts, but the self-priming The hose female connector Connect the hose female connector to the function does not and the hose male... -
Page 15: Regulatory Compliance Information
Regulatory Compliance Information Europe — EU declaration of conformity We, Shanghai HOTO Technology Co., Ltd., hereby, declare that this equipment is in compliance with the applicable Directives and European Norms, and amendments. Disposal and recycling information All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. - Page 16 DECLARATION OF CONFORMITY EU Declaration of Conformity Shanghai HOTO Technology Co., Ltd. Declare that the product: HOTO 20V Pressure Washer Pro / QWXCJ002 Complies with the essential health and safety requirements of the following directives: 2006/42/EC The Machinery Directive References to the following harmonized standard were made:...
Need help?
Do you have a question about the QWXCJ002 and is the answer not in the manual?
Questions and answers