Deleting A Mailbox; Resetting A Mailbox Password - Panasonic KX-TVA200 User Manual

Subscriber's Manual
3
2.
4
setting, then continue from j).
•
l)
Auto Forwarding Status
1.
1
setting (enable or disable).
•
m)
Forwarding Mailbox Number
1.
1
setting.
•
2.
Enter the forwarding mailbox
number.
3.
2
n)
Forwarding Delay Time
1.
1
setting.
2.
Enter the delay time, and #.
3.
2
o)
Forwarding Mode
1.
1
setting (Copy or Move).
2.
2
from l).
6.
The Auto Forwarding Status
parameter is the last parameter to
be entered. When this entry is
completed, the prompt at step 3
will appear. Continue assigning or
editing other mailboxes by
repeating from step 4.
72
for Caller Select.
to accept the current
To change the current
setting, continue from step
1.
to change the current
If set to "Disable", continue
from Step 6.
to change the current
If there's no mailbox
number is assigned,
continue from Step 2.
to accept.
to change the current
to accept.
to change the current
to accept, then continue
7.
to return to the Main
Menu.

Deleting a Mailbox

The System Manager should delete
mailboxes that are no longer needed.
When another person accesses the VPS,
the action is automatically canceled.
1.
Log in to the Main Menu.
• See 6.1 Logging in to the
System Manager's Mailbox.
2.
1
4
3.
Enter the mailbox number.
4.
to delete the mailbox.
1

Resetting a Mailbox Password

When a password is forgotten, the
System Manager must reset the
password before it can be reassigned by
the subscriber.
1.
Log in to the Main Menu.
• See 6.1 Logging in to the
System Manager's Mailbox.
2.
1
4
3.
Enter the mailbox number.
4.
to delete the password.
1
Note
• The password for System Manager
cannot be deleted here. The System
Administrator needs to reset their
password using KX-TVA Maintenance
Console.
• After the password is reset, the
conditions will be as follows:
<Subscribers' mailboxes>
2
3