Before Monitoring Using Your Computer; Installing The Multi Talk V Camera - Panasonic KX-THA13 Operating Instructions Manual

Installing the MULTI
TALK V Camera Utility
MULTI TALK V Camera Utility enables you
to use your computer to register a cordless
camera in order to view cordless camera
images with a web browser. Before you
use the cordless camera, you must install
the MULTI TALK V Camera Utility software
included with your base unit. Refer to the
"Installation Guide for MULTI TALK V
Software" for details.
Note:
L When you connect your computer to
your computer network using a MULTI
TALK V device, you need to install the
MULTI TALK V USB Driver and Utility.
Refer to the "Installation Guide for
MULTI TALK V Software" for more
information.
L For Windows XP users, you cannot start
the MULTI TALK V Camera Utility after
using the "Fast User Switching" function.
Make sure all users are logged off, then
log on again.
L If your computer network uses fixed IP
addresses, you need to assign a specific
IP address to the cordless camera.
Refer to "Setting an IP address to the
cordless camera manually ("Static")"
(page 24).
L You cannot use a global IP address for
the cordless camera.
For assistance, please visit http://www.panasonic.com/phonehelp

Before Monitoring using your Computer

Enabling monitoring
from a computer
You can allow the cordless camera to be
monitored using a computer. The default
setting is "Off".
Important:
If you turn this feature "On", you cannot use
the video phone feature during an
intercom call.
Base unit
1
{MENU} i h i {SET}
2
"PC camera access" i {SET}
3
"On" i {SET} i {STOP}
Note:
L You can program this setting using the
direct command. Press {MENU} i
{#}{6}{5}{0} i "On" i {SET} i
{STOP}.
21