Bajaj Pulsar F250 BS VI Service Station Manual page 13

Storage of Removed Parts
After all the parts including subassembly parts have been
cleaned, store the parts in a clean area. Put a clean cloth or
plastic sheet over the parts to protect from any foreign materials
that may collect before reassembly.
Inspection
Visual Inspection of Parts
Reuse of worn or damaged parts may lead to serious accident.
Visually inspect removed parts for corrosion, discoloration, or
other damage. Refer to the appropriate sections of this manual
for service limits on individual parts. Replace the parts if any
damage has been found or if the part is beyond its service limit.
13