Advertisement
Table of Contents
FOR ASSISTANCE EMAIL INFO@TEXASPOWERPADDLE.COM
Thank you for purchasing the TPP Mini Kayak Propulsion System. The TPP Mini
offers users the ability to utilize their own battery source to power the control case
and motor. In order to ensure proper performance, the battery used must be able
to supply a continuous current of 25 amps. A minimum battery capacity of 20 amp
hours is needed but we recommend a 50ah or higher to equal the performance of
our original case. If you have questions about this requirement, please contact us
directly.
Getting Started
• Attach the leads to the battery ensuring that the red lead corresponds to the
(+) positive terminal on the battery and the black lead corresponds to the
(–) negative terminal on the battery.
Secure the battery
on the kayak deck or
in a hatch. The
battery cable
provided is 8 feet
long to provide
flexibility in the
install process.
Expected Run Time using a Dakota Lithium 12 volt 54ah battery
Low Power: 8 hours
TPP Mini Case Instructions Addendum
TPP Mini™ Case Instructions
Medium Power: 6 hours
1
High Power: 2.5 hours
Advertisement
Table of Contents
Related Manuals for Texas Power Paddle Mini Case
Summary of Contents for Texas Power Paddle Mini Case
- Page 1 8 feet long to provide flexibility in the install process. Expected Run Time using a Dakota Lithium 12 volt 54ah battery Low Power: 8 hours Medium Power: 6 hours High Power: 2.5 hours TPP Mini Case Instructions Addendum...
- Page 2 The motor will then start and deploy *Refer to the main install instructions for model specific information and detailed guide for connecting the rudder or motor to your specific kayak* TPP Mini Case Instructions Addendum...
Need help?
Do you have a question about the Mini Case and is the answer not in the manual?
Questions and answers