Specification; Important Points; Normal Operating Conditions - rada TF31 Product Manual

Duct-mounted timed flow controller
Table of Contents

Advertisement

Important Points:

1.
The installation, commissioning and maintenance of this product must be carried
out in accordance with instructions given in this Manual, and must be conducted
by designated, qualified and competent personnel.
2.
Installations must comply with all Local/National Water Supply Authority
Regulations/Bye-laws, and Building and Plumbing (UK: BS6700) Regulations.
3.
Rada products are precision-engineered and should give continued superior
and safe performance, provided:
- they are installed, commissioned, operated and maintained in accordance
with these recommendations.
- periodic attention is given as necessary to maintain the product in good
functional order. Recommended guidelines are given in the MAINTENANCE
section.
4.
Warning: Continued use of this product in conditions outside the limits listed in
this section can severely affect the performance and reduce the effective service
life, and can present potential risk to users.
5.
Disinfectants: In applications where system chemical disinfection is practised,
chlorine can be used (calculated chlorine concentration of 50 mg/l [ppm]
maximum in water, per one hour dwell time, at service interval frequency). Such
procedures must be conducted strictly in accordance with the information
supplied with the disinfectant and with all relevant Guidelines/Approved Codes
of Practice. If in any doubt as to the suitability of chemical solutions, refer to
Kohler Mira Limited, or Local Agent.

Normal Operating Conditions

- daily usage of 1-6 hours
- installation and usage environment not subject to extremes of temperature,
unauthorised tampering or wilful abuse.

SPECIFICATION

4
are considered as:

Advertisement

Table of Contents
loading

Table of Contents