MySmartObject IOT-200 - Mini GPS Tracker Quick Start Guide

Inside the box

• GPS tracker + SIM card
• Charger
• Charging cable
• Quick start guide
• Strong magnetic backet

Overview

Main features

• GPS + LBS + WIFI positioning
• Strong magnet installation
• Sound alarm
• SIM change alarm
• Voice monitoring

Specifications

LED indication

Power (Red)

GSM (Green)

Note:

1. When device is turned on, LED will be off in 1 minute.
   Momentarily press ON/OFF button to light up LED for 20 seconds.
2. In sleep mode, LED is off.

Battery charging

Connect the device to the original charging connector and charging cable.

Operations & functions

Power on/off

Hold and press the ON/OFF button for 3 seconds to power on/off the device.

SOS Number

Hold and press the ON/OFF button for 3 seconds to power on/off the device.

1. Add SOS number
   SOS,A,number1,number2,number3 # (A means add number).You could set 3 SOS numbers in maximum. If set successfully, the terminal will reply "OK".
   e.g. SOS,A,13510****60,135116****6,136126****8# (set all 3 SOS numbers)
2. Delete SOS number
   SOS,D,1,2,3# (D means delete SOS number) e.g. SOS,D,1# means delete the first number
3. Query the current number
   SOS#You can set SOS number via the platform after the device is activated.

Sim change alarm

If the SIM card inserted has changed, the device would send a SIM card change alert to the pre-set SOS numbers. SMS command: SIMALM,X,M#

X=ON/OFF; ON: turn on the alarm, OFF: Turn off the alarmM=0~1; alarm mode, 0: GPRS only,

1:SMS+GPRS, M=2 GPRS+SMS+phone call; M=3

GPRS+phone call; default: 1;

Query the current parameters: SIMALM#

1. WIFI positioning mode & Positioning in a regular time interval
   SMS command: MODE,A,T#
   A=1~2; 1: WIFI positioning mode; 2: Position ng regularly mode; Default mode: 1;T=10~86400; upload interval, unit: second; default: 600;
2. Deep sleep mode
   MODE,3,T1,T2#
   T1 = Start time to wake up the device, format (HH:MM), default start time 00:00;T2 = Interval; range 1~72 hours, default 24 hours;

The MySmartObject app is available:

Download the app on the App Store or Google Play Store, depending on your smartphone type.

Use this QR code to download the app user guide:

To add a new device to your mobile app account, click the [+] button and scan the device bar code or enter manually the IMEI number indicated on the packaging.

To create geofence, select a zone manually and then choose if you want to receive an alert when entering ou leaving this zone.

You can choose if you want to receive an alert via email or a Push notification.

You will be able to access the real time location of your vehicle, object or person, its latest positions and trips.

Caution & Notice

1. SOS number should be preset if you are willing to receive alert message
2. If put indoors or covered, the device may be unable to locate, please take it to open field.
3. Use of the device in the fire or water is strongly prohibited.
4. Do Not bend or disassemble the battery and the device.
5. Please use the original battery. The warranty will be invalid by using any other accessory. The manufacturer will not take any responsibility for any damage caused by not using the original battery,
6. Do not remove the SIM card from the device

www.mysmartobject.com
info@mysmartobject.com