Subscribe to Our Youtube Channel
Related Manuals for Pinion Voyager SRM-110
Summary of Contents for Pinion Voyager SRM-110
- Page 1 Pinion Products Corporation Inc.___________________________ INSTRUCTION MANUAL SURFACE RESISTIVITY METER SRM-110 IMPORTANT!! READ THIS MANUAL BEFORE OPERATING THIS UNIT.
- Page 2 THEORY OF OPERATION The Pinion/Voyager model SRM-110 Combination Surface Resistivity meter is a simple to use, highly repeatable measuring device for determining the surface resistivity of materials, as well as resistance to ground. The SRM-110 incorporates a revolutionary three-point probe measuring technique, enabling accurate, consistent, and repeatable surface measurements.
- Page 3 Calibration Procedure: The SRM-110 should be calibrated annually. If any step fails as per the following instructions, the unit should be returned to Pinion Products Corporation Inc. for repair and calibration. Pinion Products Corporation Inc. can provide both a standard NIST Calibration with certification traceable to NIST and after calibration data, or a MIL calibration with certification traceable to NIST and both before and after calibration data.
- Page 4 led should be illuminated. 15.) Measure the voltage on the pin marked +8.000 VDC and adjust P4 for a reading of 8.000 VDC +/- .050 VDC. 16.) Measure the voltage on the pin marked –2.000 VDC and adjust P5 for a reading of –2.000 VDC +/- .050 VDC.
- Page 5 6.00 * 10^-12 10^12.5 35% 5.) The calibration check is now complete. If any step failed, the SRM-110 requires calibration. Please notify Pinion Products Corporation Inc. that the SRM-110 failed its calibration check, and information will be supplied on the procedure for having the SRM-110 calibrated.
Need help?
Do you have a question about the Voyager SRM-110 and is the answer not in the manual?
Questions and answers