Installing A Wall-Mount Kit Or Desktop Stand - Samsung LU28E570DS User Manual

1
Preparations

1.3.3 Installing a Wall-mount Kit or Desktop Stand

Power the product off and remove the power cable from the power socket.
Attach the wall-mount kit or desktop stand here
Bracket (sold separately)
Align the grooves and tightly fasten the screws on the bracket on the product with the corresponding
parts on the wall-mount kit or desktop stand you want to attach.
Notes
Using a screw longer than the standard length can damage the internal components of the

product.
The length of screws required for a wall mount that does not comply with the VESA standards may

vary depending on the specifications.
Do not use screws that do not comply with the VESA standards. Do not attach the wall-mount kit

or desktop stand using excessive force. The product may get damaged or fall and cause personal
injury. Samsung shall not be held liable for any damage or injury caused by using improper screws
or attaching the wall-mount kit or desktop stand using excessive force.
Samsung shall not be held liable for any product damage or personal injury caused by using a

wallmount kit other than the one specified or from an attempt to install the wall-mount kit on your
own.
To mount the product on a wall, ensure you purchase a wall-mount kit that can be installed 10cm

or farther away from the wall.
Be sure to use a wall-mount kit that complies with the standards.

To install the monitor using a wall mount, disconnect the stand base from the monitor.

1
3
2
4
1 Preparations
27